CCNP Enterprise 300-410 Dumps Full Questions with Free PDF Questions to Pass
100% Updated Cisco 300-410 Enterprise PDF Dumps
To prepare for the Cisco 300-410 exam, candidates should have a strong understanding of networking fundamentals and experience working with Cisco routers and switches. It is also recommended that candidates have experience with advanced routing and services technologies, such as VPNs, QoS, and network services.
What Can You Benefit from Cisco 300-410 Exam
When you get a Cisco Certified Entry Network Technician (CCENT) you can make a difference in the world by helping to protect the environment and improve people's lives. Search for the opportunities to put your knowledge to work by placing Cisco 300-410 exam certification. Worth to get Cisco 300-410 certification to make a difference in the world. Certified professionals get better salary offers, more interesting jobs are available for them, and are able to move into other fields. Cover the Cisco 300-410 exam or get ready for the exam by using Cisco 300-410 exam dumps. Get ready to pass the 300-410 exam. Moment of success is now. Files are available for download. Understand the topics to pass the 300-410 exam.
Infrastructure Services
In the framework of this domain that covers 25% of the whole content, the learners are required to demonstrate their competence in the following:
- Using logging to troubleshoot the specified network problems;
- Using Cisco DNA Center to troubleshoot the network issues.
- Troubleshooting NetFlow, which includes the v5, v9, and flexible NetFlow;
- Troubleshooting device management, such as Telnet, SSH, HTTP, HTTPS, SCP, and (T)FTP;
- Troubleshooting network performance problems with the usage of IP SLA, including connectivity, tracking objects, jitter, and delay;
- Troubleshooting IPv6 & IPv4 DHCP (IOS DHCP server, DHCP options, DHCP client, and DHCP server);
NEW QUESTION # 208
Refer to the exhibit.
An engineer is troubleshooting a TACACS problem.
Which action resolves the issue?
- A. Apply a configured AAA profile to the VTY.
- B. Configure a matching preshared key.
- C. Generate authentication from a relative source interface.
- D. Configure a matching TACACS server IP.
Answer: B
NEW QUESTION # 209
Refer the exhibit.
Which action resolves intermittent connectivity observed with the SNMP trap packets?
- A. Add one new entry in the ACL 120 to permit the UDP port 161
- B. Decrease the committed burst Size of the mgmt class map
- C. Add a new class map to match TCP traffic
- D. Increase the CIR of the mgmt class map
Answer: A
NEW QUESTION # 210
Refer to the exhibit.
Which routes from OSPF process 5 are redistributed into EIGRP?
- A. E1 and E2 subnets matching access list TO-OSPF
- B. only E2 subnets matching access list TO-OSPF
- C. E1 and E2 subnets matching prefix list TO-OSPF
- D. only E1 subnets matching prefix listTO-OS1
Answer: A
NEW QUESTION # 211
Drag and drop the addresses from the left onto the correct IPv6 filter purposes on the right.
Answer:
Explanation:
Explanation
HTTP and HTTPs run on TCP port 80 and 443, respectively and we have to remember them.
Syslog runs on UDP port 514 while NTP runs on UDP port 123 so if we remember them we can find out the matching answers easily. But maybe there is some typos in this question as 2001:d88:800:200c::c/126 only ranges from 2001:d88:800:200c:0:0:0:c to 2001:d88:800:200c:0:0:0:f (4 hosts in total). It does not cover host
2001:0D88:0800:200c::1f. Same for 2001:D88:800:200c::e/126, which also ranges from
2001:d88:800:200c:0:0:0:c to 2001:d88:800:200c:0:0:0:f and does not cover host 2001:0D88:0800:200c::1c.
NEW QUESTION # 212
Refer to the exhibit.
The network administrator configured the branch router for IPv6 on the E 0/0 interface The neighboring router is fully configured to meet requirements, but the neighbor relationship is not coming up. Which action fixes the problem on the branch router to bring the IPv6 neighbors up?
- A. Enable the IPv4 address family under the E 0/0 interface by using the address-family Ipv4 unicast command
- B. Disable OSPF for IPv4 using the no ospfv3 4 area 0 ipv4 command under the E 0/0 interface.
- C. Enable the IPv4 address family under the router ospfv3 4 process by using the address-family ipv4 unicast command
- D. Disable IPv6 on the E 0/0 interface using the no ipv6 enable command
Answer: C
Explanation:
Once again, Cisco changed the IOS configuration commands required for OSPFv3 configuration. The new OSPFv3 configuration uses the "ospfv3" keyword instead ofthe earlier "ipv6 router ospf" routing process command and "ipv6 ospf" interface commands.
The Open Shortest Path First version 3 (OSPFv3) address families feature enables both IPv4 and IPv6 unicast traffic to be supported. With this feature, users may havetwo processes per interface, but only one process per address family (AF).
NEW QUESTION # 213
An engineer configured a company's multiple area OSPF head office router and Site A cisco routers with VRF lite. Each site router is connected to a PE router of an MPLS backbone.
After finishing both site router configurations, none of the LSA 3,4 5, and 7 are installed at Site A router.
Which configuration resolves this issue?
- A. configure capability vrf-lite on Head Office and its connected PE router under router ospf 1 vrf abc
- B. configure capability vrf-lite on Head Office and Site A routers under router ospf 1 vrf abc
- C. configure capability vrf-lite on both PE routers connected to Head Office and Site A routers under routtr ospf 1 vrf abc
- D. configure capability vrf-lite on Site A and its connected PE router under router ospf 1 vrf abc
Answer: C
NEW QUESTION # 214
Refer to the exhibit.
What does the imp-null tag represent in the MPLS VPN cloud?
- A. Include the EXP bit
- B. Pop the label
- C. Impose the label
- D. Exclude the EXP bit
Answer: A
NEW QUESTION # 215
Drag and drop the MPLS VPN concepts from the left onto the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION # 216
Refer to the exhibit.
R2 is a route reflector, and R1 and R3 are route reflector clients. The route reflector learns the route to
172.16.25.0/24 from R1, but it does not advertise to R3. What is the reason the route is not advertised?
- A. R2 does not have a route to the next hop, so R2 does not advertise the prefix to other clients.
- B. In route reflector setups, prefixes are not advertised from one client to another.
- C. Route reflector setup requires full IBGP mesh between the routers.
- D. In route reflector setup, only classful prefixes are advertised to other clients.
Answer: A
NEW QUESTION # 217
Drag and drop the packet types from the left onto the correct descriptions on the right.
Answer:
Explanation:
Explanation
Unlike legacy network technologies such as ISDN, Frame Relay, and ATM that defined separate data and control channels, IP carries all packets within a single pipe. Thus, IP network devices such as routers and switches must be able to distinguish between data plane, control plane, and management plane packets to treat each packet appropriately.From an IP traffic plane perspective, packets may be divided into four distinct, logical groups:1. Data plane packets - End-station, user-generated packets that are always forwarded by network devices to other end-station devices. From the perspective of the network device, data plane packets always have a transit destination IP address and can be handled by normal, destination IP address-based forwarding processes.2. Control plane packets - Network device generated or received packets that are used for the creation and operation of the network itself. From the perspective of the network device, control plane packets always have a receive destination IP address and are handled by the CPU in the network device route processor. Examples include protocols such as ARP, BGP, OSPF, and other protocols that glue the network together.3. Management plane packets - Network device generated or received packets, or management station generated or received packets that are used to manage the network. From the perspective of the network device, management plane packets always have a receive destination IP address and are handled by the CPU in the network device route processor. Examples include protocols such as Telnet, Secure Shell (SSH), TFTP, SNMP, FTP, NTP, and other protocols used to manage the device and/or network.4. Services plane packets - A special case of data plane packets, services plane packets are also user-generated packets that are also forwarded by network devices to other end-station devices, but that require high-touch handling by the network device (above and beyond normal, destination IP address-based forwarding) to forward the packet. Examples of high-touch handling include such functions as GRE encapsulation, QoS, MPLS VPNs, and SSL/IPsec encryption/decryption, etc. From the perspective of the network device, services plane packets may have a transit destination IP address, or may have a receive destination IP address (for example, in the case of a VPN tunnel endpoint).
NEW QUESTION # 218
Refer to the exhibit.
Users in the branch network of 2001:db8:0:4::/64 report that they cannot access the Internet. Which command is issued in IPv6 router EIGRP 100 configuration mode to solve this issue?
- A. Issue the eighr command on R2.
- B. Issue the eigrp stub command on R1
- C. Issue the no eighrp stub command on R2.
- D. Issue the no neighbor stub command on R2.
Answer: D
NEW QUESTION # 219
An engineer creates a default static route on a router with a hop of 10.1.1.1. On inspection, the engineer finds the router has two VRFs, Red and Blue. The next hop is valid for both VRFs and exists in each assigned VRF. Which configuration achieves connectivity?
- A.
- B.
- C.
- D.
Answer: A
NEW QUESTION # 220
Which Cisco VPN technology can use multipoint tunnel, resulting in a single GRE tunnel interface on the hub, to support multiple connections from multiple spoke devices?
- A. Cisco Easy VPN
- B. DMVPN
- C. FlexVPN
- D. GETVPN
Answer: B
NEW QUESTION # 221 
Refer to the exhibit. Which action restores the routes from neighbors while still filtering 1.1.1.0/24?
- A. Add a second sequence in the route map permit 20
- B. Add a second line in the access list to permit any.
- C. Modify the access list to deny instead of permit it.
- D. Modify the route map to permit the access list instead of deny it
Answer: D
NEW QUESTION # 222
An engineer creates a Cisco DNA Center cluster with three nodes, but all the services are running on one host node. Which action resolves this issue?
- A. Click the master host node with all the services and select services to be moved to other hosts
- B. Restore the link on the switch interface that is connected to a cluster link on the Cisco DNA Center
- C. Enable service distribution from the Systems 360 page.
- D. Click system updates, and upgrade to the latest version of Cisco DNA Center.
Answer: C
NEW QUESTION # 223
Refer to the exhibit.
An engineer is monitoring reachability of the configured default routes to ISP1 and ISP2. The default route from ISP1 is preferred if available. How is this issue resolved?
- A. Start IP SLA by matching numbers for track and ip sla commands
- B. Start IP SLA by defining frequency and scheduling it
- C. Use the icmp-echo command to track both default routes
- D. Use the same AD for both default routes
Answer: A
NEW QUESTION # 224
Refer to the exhibit.
An administrator must configure the router with OSPF for IPv4 and IPv6 networks under a single process. The OSPF adjacencies are not established and did not meet the requirement. Which action resolves the issue?
- A. Replace OSPF process 10 on the interface with OSPF process 1, and configure an additional router ID with IPv6 address.
- B. Replace OSPF process 10 on the interface with OSPF process 1, and remove process 10 from the global configuration.
- C. Replace OSPF process 10 on the interface with OSPF process 1, for the VPv6 addressma nd remove process route ID with IPv6 address.
- D. Replace OSPF process 10 on the interface with OSPF process 1 for the IPv4 address, and remove process 10 from the global configuration.
Answer: B
NEW QUESTION # 225
During the maintenance window an administrator accidentally deleted the Telnet-related configuration that permits a Telnet connection from the inside network (Eth0/0) to the outside of the networking between Friday - Sunday night hours only.
Which configuration resolves the issue?
- A.
- B.
- C.
- D.
Answer: B
NEW QUESTION # 226
......
Use Valid Exam 300-410 by PassTestking Books For Free Website: https://www.passtestking.com/Cisco/300-410-practice-exam-dumps.html
Free CCNP Enterprise 300-410 Official Cert Guide PDF Download: https://drive.google.com/open?id=1Tb1YGE2GgssRIRqJvAd9GEnza131I0rU