Free 2021 300-615 Dumps 100 Pass Guarantee With Latest Demo
Prepare 300-615 Question Answers Free Update With 100% Exam Passing Guarantee [2021]
To Sum Up
Choose the most suitable study resources and start your preparation for the Cisco 300-615 exam. With official training and books, you’ll get ready to pass it in one go. Remember to ace the second required test as well, and the CCNP Data Center certificate will come with all its related perks.
Cisco 300-615 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
| Topic 12 |
|
NEW QUESTION 48
Refer to the exhibit.
The EEM script fails to send an SNMP trap when a user attempts to enter configuration mode. Which configuration is missing from the script?
- A. IP address of the SNMP server
- B. event-default action statement
- C. event statement
- D. policy-default action statement
Answer: A
NEW QUESTION 49
Refer to the exhibit.
An engineer is troubleshooting why user1, user2, and user3 from group STORAGE- ADMINISTRATOR in Microsoft Active Directory cannot log in to the Cisco MDS SSH CLI. Which action resolves the issue?
- A. Include specific users into MDS role configuration.
- B. Configure the role name to match the group name on Microsoft Active Directory.
- C. Configure SSH logins on Cisco MDS switch.
- D. Integrate Cisco MDS with Microsoft Active Directory.
Answer: B
NEW QUESTION 50
A firmware upgrade on a fabric interconnect fails. A bootflash contains a valid image. Drag and drop the recovery steps from the left onto the correct order on the right.
Answer:
Explanation:
NEW QUESTION 51
After upgrading a client's fabric interconnect to the latest version, an engineer discovers that the appliance has lost its entire configuration. Which two locations should an engineer check to confirm that the appliance had backed up the configuration prior to the upgrade in order to retrieve the lost configuration? (Choose two.)
- A. Service profiles page, InternalBackup stage
- B. Admin page, PollInternalBackup stage
- C. Admin page, InternalBackup stage.
- D. Equipment FSM page, PollInternalBackup stage
- E. Equipment FSM page, InternalBackup stage
Answer: D,E
NEW QUESTION 52
An engineer discovers that an NPV/NPIV uplink experiences a heavy load and plans to add more uplinks.
What occurs when the new uplinks are added to the uplink?
- A. All connections must be reset before the new uplinks are used.
- B. New and existing connections automatically use the new uplinks.
- C. Only new connections automatically use the new uplinks.
- D. Paths must be defined before new connections use the new uplinks.
Answer: B
Explanation:
Section: Storage Network
NEW QUESTION 53
Refer to the exhibit.
An engineer is troubleshooting why user1, user2, and user3 from group STORAGE- ADMINISTRATOR in Microsoft Active Directory cannot log in to the Cisco MDS SSH CLI. Which action resolves the issue?
- A. Include specific users into MDS role configuration.
- B. Configure the role name to match the group name on Microsoft Active Directory.
- C. Configure SSH logins on Cisco MDS switch.
- D. Integrate Cisco MDS with Microsoft Active Directory.
Answer: B
NEW QUESTION 54
The Cisco Nexus switch is connected to a peer switch that is not running Cisco NX-OS. The switches are connected using port channel and are experiencing packet loss. Which action should be performed on the Cisco Nexus switch ports to resolve this issue?
- A. Turn off lacp suspend-individual.
- B. Turn off lacp graceful-convergence.
- C. Turn on lacp suspend-individual.
- D. Turn on lacp graceful-convergence.
Answer: B
Explanation:
Section: Network
NEW QUESTION 55
Refer to the exhibit.
The vPC between switch1 and switch2 does not work. Which two actions resolve the problem? (Choose two.)
- A. Match the vPC domain ID between the two devices.
- B. Configure the IP address on the interface.
- C. Configure one of the switches as primary for the vPC.
- D. Activate VLANs on the vPC.
- E. Correct the configuration of the vPC peer link and the vPC peer keepalive.
Answer: A,E
Explanation:
Explanation
Both "vPC peer link" and "Peer keepalive link" are down. So, D is correct.
SW1 is using vPC domain ID 500, which SW2 is using 20. They must match. So, E is correct.
NEW QUESTION 56 
Refer to the exhibit. An engineer is configuring boot from iSCSI on a Cisco UCS B-Series Blade Server, but the LUN fails to mount. Which action resolves the issue?
- A. Configure an MTU size of 9000 on the appliance port.
- B. Set a connection timeout value of 250 in the iSCSI Adapter Policy.
- C. Statically configure the target information in the Boot Policy.
- D. Configure a QoS policy on the vNIC.
Answer: C
Explanation:
Section: Compute Platforms
NEW QUESTION 57
Refer to the exhibit.
An engineer troubleshoots the HSRP configuration and notes that the remote end uses HSRP version 1. The engineer sets the local HSRP to version 1, but the problem continues. Which action resolves the issue?
- A. Set the local group number as 300 in the remote data center configuration
- B. Reduce the priority of the local HSRP to below 100 to force the local HSRP to standby and then change the version to version 1.
- C. Run version 1 and version 2 HSRP on VLAN300 in the local data center.
- D. Change the local group number to 255 or less and request that the remote data center matches the group member in its configuration.
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipapp_fhrp/configuration/xe-16/fhp-xe-16-book/fhp-hsrp-v2.p
NEW QUESTION 58
Refer to the exhibit.
During implementation of a Cisco UCS C-Series Server, an engineer receives the status that is shown in the exhibit. Which action resolves the issue.
- A. Set SLOT-1 Sync Mode to "Auto"
- B. Reconfigure the Drive Type from "Removable" to "Non-Removable"
- C. Configure the RAID that is associated with the card.
- D. Insert an SD card into SLOT-2
Answer: B
NEW QUESTION 59
A server fails to boot from the operating system after a RAID1 cluster migration. The RAID remains in an inactive state during and after a service profile association. Which action resolves the issue?
- A. Configure the SAN boot target in the service profile.
- B. Use a predefined local disk configuration policy.
- C. Remove the local disk configuration policy.
- D. Configure the SAN boot target to any configuration mode.
Answer: B
NEW QUESTION 60
Drag and drop the commands from the left onto the correct categories on the right.
Answer:
Explanation:
NEW QUESTION 61
Refer to the exhibit.
vPC between switch1 and switch2 is not working. Which two actions are needed to fix the problem? (Choose two.)
- A. Configure vPC peer link and vPC peer keepalive correctly.
- B. Match vPC domain ID between the two devices.
- C. Configure one of the switches as primary for the vPC.
- D. Configure IP address on the interface.
- E. Activate VLANs on the vPC.
Answer: B,E
NEW QUESTION 62
Refer to the exhibit.
An engineer is performing a health check on ACI. Which statement about interface Ethernet 1/11 is true?
- A. "out-of-service" indicates that no service graph is in use for this interface.
- B. The interface is working correctly and fully operational, but it is not in use.
- C. "out-of-service" is the default interface status in ACI.
- D. The interface policy is misconfigured.
Answer: D
NEW QUESTION 63
One of Cisco Nexus Series interfaces has become errdisabled with the error message "DCX-No ACK in
100 PDUs". What is the cause of this error?
- A. LLDP is disabled on the switch.
- B. The host has not responded to the Control Sub-TLV DCBX exchanges of the switch.
- C. The acknowledgement number in the server response has not incremented for 100 exchanges.
- D. Cisco Discovery Protocol is disabled on the switch.
Answer: C
Explanation:
Section: Storage Network
NEW QUESTION 64
An engineer is implementing a storage VDC, but fails. Which two prerequisites must be in place before a storage VDC is implemented? (Choose two.)
- A. FCoE license
- B. STORAGE-ENT license
- C. F-Series module
- D. ESSENTIALS license
- E. M-Series module
Answer: A,C
Explanation:
Section: Storage Network
NEW QUESTION 65
You have an ACI environment with three APICs, two spine switches, and four-leaf switches. You wipe and reboot all APICs first then leaf and spine switches one-by-one and successfully go through the Initial Setuo dialogue on the APIC 1 CIMC KVM console. When you log in to the APIC1 WebGUI, you notice that you do not see any directly connected leaf switches being discovered under Fabric > Inventory > Fabric Membership. What is the cause of the issue?
- A. Rebooting the APICs and the leaf and spine switches after wiping them is not required.
- B. The same Fabric Name value should be used before after wiping all devices.
- C. The leaf nodes were not erased properly, which caused a fabric parameters mismatch with the APIC1.
- D. You forgot to enter the TEP Pool value during the Initial Setup dialogue on APIC1.
Answer: D
NEW QUESTION 66
Refer to the exhibit.
An engineer deploys SAN environment with two interconnected Cisco MDS 9000 Series switches. When the engineer attempts a zone merge, it fails with the error that is presented in the exhibit. Which action resolves the issue?
- A. Change the name of one of the zones to match the other zone set.
- B. Ensure that the zone members have different names.
- C. Import or export a zone set between the switches to synchronize the switches.
- D. Set the distribute policy of the zone to full.
Answer: C
Explanation:
https://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_3_x/troubleshooting/guide/ts_guide.pdf
NEW QUESTION 67
Refer to the exhibit.
A PC belongs to VLAN 68 The user experiences a large amount of packet loss when communicating with hosts that are outside of VLAN 68. Which action resolves the problem?
- A. Remove the HSRP configuration
- B. Replace HSRP with GLBP
- C. Enable the peer-gateway feature
- D. Configure ip arp synchronization on both switches.
Answer: C
Explanation:
Explanation
I assume that the PC is sending traffic with destination MAC of Nexus physical interfaces. If more snap shots about this question are available, please share.
NEW QUESTION 68
......
Obligatory Prerequisites
Though Cisco 300-615 is associated with the professional stage, there are no mandatory prerequisites to be met for becoming eligible. It is open for all. However, it won’t hurt if the test-taker has already explored the data center industry and has gained hands-on experience of about three to five years in generating these solutions.
Dumps Real Cisco 300-615 Exam Questions [Updated 2021]: https://www.passtestking.com/Cisco/300-615-practice-exam-dumps.html
Free 300-615 Exam Dumps to Pass Exam Easily: https://drive.google.com/open?id=1mIAy1nsCRcQjyCYbnVHlJ5Zz7mTuR8DO