Contact Us
FAQ's
Login / Register

Home
FORUM
All Vendors
Guarantee
Testimonials
Cart (0)

USGBC LEED AP Building Design + Construction (LEED AP BD+C) - LEED-AP-BD-C Exam Practice Test

Page: 1 / 23
Total 339 questions

Please signup / login to view this exam, then you will be able to view the entire exam for free.

Get Full Access Now

Question 1

Which of the following strategies can be used to decrease the envelope load of a building?

A. Decrease opaque wall area B. Maximize daylighting C. Provide summer solar shading D. Use economizers for free cooling

Discussion 0

Correct Answer: C Vote an answer

Explanation: Only visible for PassTestking members. You can sign-up / login (it's free).

Question 2

For Energy and Atmosphere Credit, Advanced Energy Metering, what is the minimum percentage requirement for metering any individual energy end uses?

A. Those that represent 10% or more of the total annual consumption of the building B. Those that represent 15% or more of the total annual consumption of the building C. Those that represent 25% or more of the total annual consumption of the building D. Those that represent 20% or more of the total annual consumption of the building

Discussion 0

Correct Answer: A Vote an answer

Explanation: Only visible for PassTestking members. You can sign-up / login (it's free).

Question 3

For an emergency care facility project, which of the following credits can be achieved if the total cost of permanently installed products are 25% cradle-to-cradle V3 Gold and 25% GreenScreen List Translator?

A. Materials and Resources Credit, Furniture and Medical Furnishing, Option 3. Multi-Attribute Assessment of Products & Innovation Credit, Innovation, Exemplary Performance B. Materials and Resources Credit, Building Life-Cycle Impact Reduction, Option 3. Building and Material Reuse
& Innovation Credit, Innovation, Exemplary Performance C. Materials and Resources Credit, Furniture and Medical Furnishings, Option 3. Multi-Attribute Assessment of Products & Materials and Resources Credit, Building Product Disclosure and Optimization, Material Ingredients, Option 2. Material Ingredient Optimization D. Materials and Resources Credit, Building Product Disclosure and Optimization, Material Ingredients, Option 2.
Material Ingredient Optimization & Innovation Credit, Innovation, Exemplary Performance

Discussion 0

Correct Answer: D Vote an answer

Explanation: Only visible for PassTestking members. You can sign-up / login (it's free).

Question 4

An office is relocating to a new facility. Any furniture that is relocated to the new site can contribute as a reused material for Materials and Resources Credit, Building Product Disclosure and Optimization - Sourcing of Raw Materials if it was purchased:

A. At least two years prior to the date of project registration B. At least five years prior to the certification of the project C. Within the past five years D. Within two years of the substantial completion of the project

Discussion 0

Correct Answer: A Vote an answer

Explanation: Only visible for PassTestking members. You can sign-up / login (it's free).

Question 5

What is the definition of the evapotranspiration rate?

A. Evaporation of onsite reuse water B. Percentage of potable water usage for irrigation C. Amount of water loss in a vegetated surface in units of water depth D. Water loss from evaporation in micro irrigation systems

Discussion 0

Correct Answer: C Vote an answer

Explanation: Only visible for PassTestking members. You can sign-up / login (it's free).

Question 6

Which of the following strategies can be used to reduce the internal load of a building?

A. Oversize the HVAC systems B. Install low reflective exterior facade C. Increase the insulating value of the glazing and window frame system D. Decreasing lighting power

Discussion 0

Correct Answer: D Vote an answer

Explanation: Only visible for PassTestking members. You can sign-up / login (it's free).

Question 7

Which federal agency designates Federal Renewal Community sites, which can be considered High Priority Sites for project development?

A. U.S. Department of Housing and Urban Development B. U.S. Environmental Protection Agency C. U.S. Department of Agriculture D. U.S. Internal Revenue Service

Discussion 0

Correct Answer: D Vote an answer

Explanation: Only visible for PassTestking members. You can sign-up / login (it's free).

Question 8

Every location in the U.S. identifies how many regional credits?

A. Four B. Six C. Five D. Seven

Discussion 0

Correct Answer: A Vote an answer

Explanation: Only visible for PassTestking members. You can sign-up / login (it's free).

Question 9

The use of lead, mercury, copper and cadmium should be limited because they all

A. reduce the life cycle assessment of a building B. interfere with the magnetic instruments in a medical building C. are persistent bioaccumulative toxins D. take an unreasonable amount of energy to recycle

Discussion 0

Correct Answer: C Vote an answer

Explanation: Only visible for PassTestking members. You can sign-up / login (it's free).

Question 10

A mixed-use development is located 1/2 mi. (0.80 km) from a future commuter rail line station. Which of the following pieces of information is needed when determining whether the rail line station can contribute to Location and Transportation Credit, Access to Quality Transit?

A. Passenger capacity B. Rail line station construction completion date C. Connections to transfer routes D. Discounted rail pass availability

Discussion 0

Correct Answer: B Vote an answer

Explanation: Only visible for PassTestking members. You can sign-up / login (it's free).

Question 11

The gross floor area of a LEED project should be no less than what percent of the gross land area within the LEED project boundary?

A. 1% B. 2% C. 3% D. 4%

Discussion 0

Correct Answer: A Vote an answer

Explanation: Only visible for PassTestking members. You can sign-up / login (it's free).

Question 12

A new commercial building is being designed to use small capacity air handling units. To meet the requirements of the Carbon Dioxide Monitoring strategy in the Indoor Environmental Quality Credit, Enhanced Indoor Environmental Quality Strategies, where would CO2 monitors need to be located?

A. In each densely occupied space B. In each occupied space and outdoors C. In each occupied space D. In each occupied space over 500 ft2 (46 m2)

Discussion 0

Correct Answer: A Vote an answer

Explanation: Only visible for PassTestking members. You can sign-up / login (it's free).

Question 13

In order for a product to contribute to Materials and Resources Credit, Building Product Disclosure and Optimization, Environmental Product Declarations, Option 1. Environmental Product Declaration, the product needs to be

A. critically reviewed life-cycle assessment conforming to ISO 14044 B. third-party verified in a Corporate Sustainability Report (CSR) C. Forest Stewardship Council (FSC)-certified D. cradle-to-cradle certified

Discussion 0

Correct Answer: A Vote an answer

Explanation: Only visible for PassTestking members. You can sign-up / login (it's free).

Question 14

The design team for a school project finds that they can achieve an 18% savings in indoor water use from the baseline. If the team adds a rainwater harvesting system that reduces water use by another 10%, they can earn:

A. One or two points for Water Efficiency Credit, Indoor Water Use Reduction depending on the type of metering installed B. Only the Water Efficiency Prerequisite, Indoor Water Use Reduction C. Two points for Water Efficiency Credit, Indoor Water Use Reduction D. Zero points because they have not fulfilled the Water Efficiency Prerequisite, Indoor Water Use Reduction

Discussion 0

Correct Answer: C Vote an answer

Explanation: Only visible for PassTestking members. You can sign-up / login (it's free).

Question 15

Which is a benefit of earning Regional Priority credits?

A. The LEED project can achieve more sustainable outcomes by recognizing the issues that are a priority in the project's location B. The context of the project's location is not addressed, allowing the project team to focus on the building's priority issues C. The project's operations are considered separately from design and construction, allowing the project team to focus on regional issues D. The LEED project is able to skip a review phase by considering the issues that are a priority in the project's location

Discussion 0

Correct Answer: A Vote an answer

Explanation: Only visible for PassTestking members. You can sign-up / login (it's free).

Page: 1 / 23
Total 339 questions

Unlock all LEED-AP-BD-C features

No captcha needed
365 Days Free Updates
Set your Desired Pass Percentage
Allocate Time (Hours : Minutes)
Two Modes For LEED-AP-BD-C Practice
Customer Support

Get Full Access Now

Get in Touch

PassTestking

Our Exam Dumps will provide you with the free demo before you purchase. Our Practice Questions can help you improve your professional ability. Our Study Material provide you with excellent prepare materials for you to pass the exam and get the certification.

Latest Practice Tests

156-215.82 Practice Test
AZ-104 Practice Test
SPLK-1005 Practice Test
DP-750 Practice Test
400-007 Practice Test
CFE-Fraud-Investigations-and-Legal-Issues Practice Test

Useful Links

All Products
FAQs
Privacy Policy
Guarantee & Refund Policy
Terms & Conditions
How to buy?
About Us

Contact Us

Our Working Time: ( GMT 0:00-15:00 )
From Monday to Saturday

Support: Contact now

If you have any question please leave me your email address, we will reply and send email to you in 12 hours.

Copyright © 2026 PASSTESTKING.COM. All rights reserved. All trademarks are the property of their respective owners and we don't provide actual questions from any vendor.