Verified & Latest C_THR92_2305 Dump Q&As with Correct Answers
Latest C_THR92_2305 dumps - Instant Download PDF
NEW QUESTION # 15
The data source used by the two tables only displays current (active) employees.
How would you configure a filter on the table End of Previous Year Headcount by Location to display data accurately?
Note: There are 2 correct answers to this question.
- A. Set the Range type to Offset
- B. Set a filter on Hire Date (Member)
- C. Set the Range type to Standard
- D. Set a filter on Hire Date (Range)
Answer: A,D
NEW QUESTION # 16
The drill-down list of a tile contains more entries than the values displayed in a chart (see attached image).
How do you make the outputs match?
- A. Remove the category assignment field.
- B. Configure a filter to remove the duplicate column.
- C. Change the metric calculation from Count to Count distinct.
- D. Remove the column that would generate multiple entries per metric.
Answer: B
NEW QUESTION # 17
You are creating a query for a historical compensation story report in Query Designer. You have added the Job Information table to the query, configured a scope filter, and previewed the result to verify you are returning the appropriate employees.
You add the related table Compensation to the query.
When you preview the query, you only get the current compensation information for the employees.
Why do you only receive the current records?
Note: There are 2 correct answers to this question.
- A. The compensation table time filter is set to: Same Filter as First Table.
- B. The Query Advanced Filter is set to: Job Information effective start date equal to Dynamic Date:
Today. - C. The Job information table time filter is set to: As of Date > Dynamic Date: Today.
- D. The compensation table time filter is set to: As of Date > Dynamic Date: Today.
Answer: A,C
NEW QUESTION # 18
You are configuring a story report. You add the image widget to the top-left corner of the canvas. You
then upload the SuccessFactors logo in the Builder and select the logo image so it
displays on the canvas. When you preview the report in View Mode, the logo appears centered on the
canvas.
What action do you take so the Logo appears in the top-left corner when viewing the report in view
mode?
- A. In Styling for the image, set the Image Properties to Pan.
- B. In Designer Mode, add another widget under the image.
- C. In Styling for the page, set the Page Size to Fixed.
- D. In Builder for the image, set the image to Dynamic.
Answer: B
NEW QUESTION # 19
A report consumer claims that a canvas report shared with them is NO longer available in Report Center.
Upon your investigation, you find the report has been deleted. You need to reproduce the report as quickly as possible.
What action do you take?
- A. Contact Successfactors support to request the report be restored.
- B. Use the Restore Deleted Report tool to restore the report.
- C. Create a new report and add orphaned pages. Share the report.
- D. Use the Recycle Bin to restore the Report.
Answer: B
NEW QUESTION # 20
When you create a table report, in which step can you include inactive users?
- A. General
- B. Columns
- C. Filters
- D. People
Answer: D
NEW QUESTION # 21
An executive reviews a canvas report on employee compensation. The executive discovers that NOT all employees are included in the report. You need to adjust the report so that all employees are included by default, but included employees can be adjusted at runtime.
How do you accomplish this task?
Note: There are 2 correct answers to this question.
- A. Set the People Scope Team Manager to Logged in User and set Team Reporting Type to other filters.
- B. Set the People Scope Team Manager to CEO and set Team Reporting Type to Team View.
- C. Enable User Prompted People Scope.
- D. Set a run-time filter on User Sys ID.
Answer: A,C
NEW QUESTION # 22
A report consumer claims that a canvas report shared with them is NO longer available in Report Center.
Upon your investigation, you find the report has been deleted. You need to
reproduce the report as quickly as possible.
What action do you take?
- A. Contact Successfactors support to request the report be restored.
- B. Use the Restore Deleted Report tool to restore the report.
- C. Create a new report and add orphaned pages. Share the report.
- D. Use the Recycle Bin to restore the Report.
Answer: B
NEW QUESTION # 23
What features are available only when you use Business Intelligence and Reporting Tools (BIRT) with Table Reports?
Note: There are 2 correct answers to this question.
- A. Printable chart with custom formatting requirements
- B. Advanced cell level formulas
- C. Simple data extraction
- D. FTP scheduling
Answer: A,B
NEW QUESTION # 24
You are creating a calculated column to calculate an employee's organizational tenure.
Why does the formula in the screenshot result in an error?
- A. The result of the formula is negative.
- B. An incorrect data type has been selected.
- C. An incorrect dynamic date variable has been used.
- D. An "if then else" statement needs to be included.
Answer: C
NEW QUESTION # 25
You are creating a Story report on Job Classifications. You have configured the chart, table, and input
control on the canvas as displayed in the screenshot.
How do you set the input control?
- A. Configure it for Linked Analysis.
- B. Convert it to a Story Filter.
- C. Enable Cascading Effects.
- D. Create the corresponding filter on each chart.
Answer: D
NEW QUESTION # 26
You are creating a calculated column to calculate an employee's organizational tenure.
Why does the formula in the screenshot result in an error?
- A. The result of the formula is negative.
- B. An incorrect dynamic date variable has been used.
- C. An "if then else" statement needs to be included.
- D. An incorrect data type has been selected.
Answer: D
NEW QUESTION # 27
Where can you obtain the latest versions of the standard report templates provided by SAP Success
Factors?
- A. SAP PartnerEdge
- B. SuccessFactors HCM Cloud Operations Portal
- C. SAP Help Portal
- D. SAP Support Portal
Answer: C
NEW QUESTION # 28
When you share a canvas report, from where can the user access that report?
Note: There are 2 correct answers to this question.
- A. Metrics Panel
- B. Report Center
- C. Reporting Menu
- D. Home Page
Answer: B,C
NEW QUESTION # 29
Which of the following would make it possible for a filter to update multiple charts using linked analysis?
Note: There are 2 correct answers to this question.
- A. The charts should have the same data source.
- B. The data sources for the charts should contain linked dimensions.
- C. The charts should use the same measures.
- D. The chart should use the same aggregation.
Answer: B,C
NEW QUESTION # 30
What setting in Provisioning enables Live data source?
- A. Platform Client
- B. Workforce Analytics Client
- C. EC Client
- D. LM5 Client API
Answer: B
NEW QUESTION # 31
Why would you export report definitions?
Note: There are 2 correct answers to this question.
- A. To support report version control
- B. To schedule reports for offline execution
- C. To move reports between company instances
- D. To distribute reports to report consumers
Answer: C,D
NEW QUESTION # 32
When you share a tile, how can the user view that tile?
Note: There are 3 correct answers to this question.
- A. Homepage
- B. Custom table report
- C. iOSSFapp
- D. Dashboard
- E. Canvas Report
Answer: A,C,D
NEW QUESTION # 33
You want to create a report that returns only employees who were born in 1961. You also want to
enable the person who runs the report to specify a different birth year.
How can you achieve this?
Note: There are 2 correct answers to this question.
- A. 1. Select Manage Query Filters.
2. Expand Personal Information table and select Date of Birth.
3. Select Greater than or equal to from the operator list.
4. Set Custom filter date to 1/1/1961.
5. Select OK and then select Add.
6. Expand Personal Information table and select Date of Birth.
7. Select less than or equal to from the operator list.
8. Set Custom filter date to 12/31/1961.
9. Select OK. - B. 1. Select Date Options from the Toolbar.
2. Set Date Type to As of Date.
3. Set As of Date to 1/1/1961.
4. Set Use Custom Columns.
5. Select Date of Birth from Start Date Column.
6. Select Date of Birth from End Date Column.
7. Set Selectable At Runtime. - C. 1. Select Date Options from the Toolbar.
2. Set Date Type to Show All.
3. Select Manage Run Time Filters from the Toolbar.
4. Expand Personal Information table.
5. Select Date of Birth column.
6. Select OK. - D. 1. Select Date Options from the Toolbar.
2. Set Date Type to Date Range (On Start Date).
3. Set From date to 1/1/1961 and To date to 12/31/1961.
4. Set Use Custom Columns.
5. Select Date of Birth from Start Date Column.
6. Set Selectable At Runtime.
Answer: A,D
NEW QUESTION # 34
You support report consumers. A report consumer asks if it is possible to save the selected items when viewing the detail of a chart in a story report (see screenshot).
How do you tell the report consumer to save the state?
Note: There are 2 correct answers to this question.
- A. View the chart in explorer mode and choose + New View to create an explorer view.
- B. Select the chart on the canvas, view the action menu, and choose Export.
- C. View the chart in explorer mode, view the action menu, and choose Export.
- D. Select the chart on the canvas, view the bookmark menu and choose Bookmark Current State.
Answer: C,D
NEW QUESTION # 35
......
The Ultimate SAP C_THR92_2305 Dumps PDF Review: https://www.passtestking.com/SAP/C_THR92_2305-practice-exam-dumps.html
Updated Verified C_THR92_2305 Downloadable Printable Exam Dumps: https://drive.google.com/open?id=1i8zCyDSDfaDEZTYPGJZNrAraCIkxR6ZX