[Sep-2021] Pass Microsoft MD-100 Exam in First Attempt Guaranteed!
Full MD-100 Practice Test and 300 unique questions with explanations waiting just for you, get it now!
NEW QUESTION 151
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain named contoso.com. The domain contains the users shown in the following table.
You have a computer named Computer1 that runs Windows 10 and is in a workgroup.
A local standard user on Computer1 named User1 joins the computer to the domain and uses the credentials of User2 when prompted.
You need to ensure that you can rename Computer1 as Computer33.
Solution: You use the credentials of User2 on Computer1.
Does this meet the goal?
- A. No
- B. Yes
Answer: A
Explanation:
Renaming a domain-joined computer will also rename the computer account in the domain. To do this, you need domain administrator privileges.
User2 is a domain user, not an administrator. Use User3's credentials instead.
References:
https://docs.microsoft.com/en-us/windows/security/identity-protection/access-control/active-directory-security-groups
NEW QUESTION 152
You have a computer that runs Windows 10. The computer is in a workgroup. The computer is used to provide visitors with access to the Internet.
You need to configure the computer to meet the following requirements:
Always sign in automatically as User1.
Start an application named App1.exe at sign-in.
What should you use to meet each requirement? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
References:
http://www.itexpertmag.com/server/complete-manageability-at-no-extra-cost
NEW QUESTION 153
You have a computer named Computer1 that runs Windows 10.
On Computer1 you create a VPN connection as shown in the following exhibit.
Answer:
Explanation:
NEW QUESTION 154
An employee reports that she must perform a BitLocker recovery on her laptop. The employee does not have her BitLocker recovery key but does have a Windows 10 desktop computer.
What should you instruct the employee to do from the desktop computer?
- A. Go to https://account.activedirectory.windowsazure.com and view the user account profile
- B. Run the Enable-BitLockerAutoUnlock cmdlet
- C. Run the manage-bde.exe -status command
- D. From BitLocker Recovery Password Viewer, view the computer object of the laptop
Answer: A
Explanation:
References:
https://celedonpartners.com/blog/storing-recovering-bitlocker-keys-azure-active-directory/
NEW QUESTION 155
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
Username and password
Use the following login credentials as needed:
To enter your password, place your cursor in the Enter password box and click on the password below.
Username: Contoso/Administrator
Password: Passw0rd!
The following information is for technical support purposes only:
Lab Instance: 10921597
You need to create a file named Private.txt in a folder named Folder1 on the C drive of Client2.
You need to encrypt Private.txt and ensure that a user named User1 can view the contents of Private.txt.
To complete this task, sign in to the required computer or computers.
Answer:
Explanation:
After creating Private.txt and saving it Folder1, right-click on the Private.txt, and select Properties from the context menu.
On the General tab, click Advanced. Next, check the box "Encrypt contents to secure data" and click OK.
A window will pop up asking you whether or not you want to encrypt the file and its parent folder. Select the "Encrypt the file only" and click OK.
Private.txt will now show its file name in green color.
Right-click Private.txt and then select Properties.
Click Advanced on the General tab.
Click Details on the Advanced Attributes tab to open the User Access dialog box.
Click Add to open the Encrypting File System dialog box and then select User1.
Click OK to add User1 to the list of users who have access to the file.
Click OK until you've exited out of the dialog boxes.
Reference:
https://www.top-password.com/blog/password-protect-notepad-text-files-in-windows-10/
https://sourcedaddy.com/windows-7/how-to-grant-users-access-to-an-encrypted-file.html
NEW QUESTION 156
You have a computer named Computer1 that runs Windows 7. Computer1 has a local user named User1 who has a customized profile.
On Computer1, you perform a clean installation of Windows 10 without formatting the drives.
You need to migrate the settings of User1 from Windows7 to Windows 10.
Which two actions should you perform? To answer, drag the appropriate actions to the correct targets. Each action may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
References:
https://docs.microsoft.com/en-us/windows/deployment/usmt/usmt-how-it-works
NEW QUESTION 157
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a laptop named Computer1 that runs Windows 10.
When in range, Computer1 connects automatically to a Wi-Fi network named Wireless1.
You need to prevent Computer1 from automatically connecting to Wireless1.
Solution: From the Services console, you disable the Link-Layer Topology Discovery Mapper service.
Does this meet the goal?
- A. No
- B. Yes
Answer: A
Explanation:
Topic 1, Fabrikam, Inc.
Overview Existing Environment
Fabrikam, Inc. is a distribution company that has 500 employees and 100 contractors.
Active Directory
The network contains an Active Directory forest named fabrikam.com. The forest is synced to Microsoft Azure Active Directory (Azure AD). All the employees are assigned Microsoft 365 E3 licenses.
The domain contains a user account for an employee named User10.
Client Computers
All the employees have computers that run Windows 10 Enterprise. All the computers are installed without Volume License Keys. Windows 10 license keys are never issued.
All the employees register their computer to Azure AD when they first receive the computer.
User10 has a computer named Computer10.
All the contractors have their own computer that runs Windows 10. None of the computers are joined to Azure AD.
Operational Procedures
Fabrikam has the following operational procedures:
Updates are deployed by using Windows Update for Business.
When new contractors are hired, administrators must help the contactors configure the following settings on their computer:
- User certificates
- Browser security and proxy settings
- Wireless network connection settings
Security policies
The following security policies are enforced on all the client computers in the domain:
* All the computers are encrypted by using BitLocker Drive Encryption (BitLocker). BitLocker recovery information is stored in Active Directory and Azure AD.
* The local Administrators group on each computer contains an enabled account named LocalAdmin.
* The LocalAdmin account is managed by using Local Administrator Password Solution (LAPS).
Problem Statements
Fabrikam identifies the following issues:
* Employees in the finance department use an application named Application1. Application1 frequently crashes due to a memory error. When Application1 crashes, an event is written to the application log and an administrator runs a script to delete the temporary files and restart the application.
* When employees attempt to connect to the network from their home computer, they often cannot establish a VPN connection because of misconfigured VPN settings.
* An employee has a computer named Computer11. Computer11 has a hardware failure that prevents the computer from connecting to the network.
* User10 reports that Computer10 is not activated.
Technical Requirements
Fabrikam identifies the following technical requirements for managing the client computers:
* Provide employees with a configuration file to configure their VPN connection.
* Use the minimum amount of administrative effort to implement the technical requirements.
* Identify which employees' computers are noncompliant with the Windows Update baseline of the company.
* Ensure that the service desk uses Quick Assist to take remote control of an employee's desktop during support calls.
* Automate the configuration of the contractors' computers. The solution must provide a configuration file that the contractors can open from a Microsoft SharePoint site to apply the required configurations.
NEW QUESTION 158
You have 20 computers that run Windows 10.
You configure all the computers to forward all the events from all the logs to a computer named Computer1 that runs Windows 10.
When you sign in to Computer1, you cannot see any security events from other computers. You can see all the other forwarded events from the other computers.
You need to ensure that the security events are forwarded to Computer1.
What should you do?
- A. On Computer1, add the account of Computer1 to the Event Log Readers group.
- B. On each computer, add the NETWORK SERVICE account to the Event Log Readers group.
- C. On each computer, run wecutil qc /q.
- D. On each computer, run winrm qc -q.
Answer: A
Explanation:
Explanation/Reference:
References:
https://docs.microsoft.com/en-us/windows/security/threat-protection/use-windows-event-forwarding-to-assist- in-intrusion-detection
NEW QUESTION 159
You have computers that run Windows 10 and are configured as shown in the following table.
You have a removable USB drive named USBDrive1 that is encrypted by using BitLocker to Go.
You plan to use USBDrive1 on Computer1, Computer2, and Computer3.
You need to identify on which computers you can enable automatic unlocking of BitLocker on USBDrive1.
Which computers should you identify?
- A. Computer3 only
- B. Computer2 and Computer3 only
- C. Computer1, Computer2, and Computer3
- D. Computer1 and Computer3 only
Answer: D
Explanation:
Explanation
The BitLocker key is stored in the registry when you enable auto-unlock but only if the operating system drive is encrypted with BitLocker. A TPM is not required.
NEW QUESTION 160
Your network an Active Directory domain named adatum.com. The domain contains 50 computers that runs Windows 8.1. The computer has locally installed desktop application that are compatible with Windows 10.
You need to upgrade the computers to windows 10, The solution must preserver the locally installed desktop applications.
Solution: You use Windows Autopilot and create a deployment profile. You generalize each computer, and the you restart the computers.
Does this meet the goal?
- A. No
- B. Yes
Answer: A
NEW QUESTION 161
You need to meet the technical requirements for the helpdesk users.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
References:
https://www.itprotoday.com/compute-engines/what-group-policy-creator-owners-group
NEW QUESTION 162
You need to meet the technical requirement for Computer1.
What should you do? To answer, select the appropriate options in the answer area.
Answer:
Explanation:
NEW QUESTION 163
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A user named User2 has a computer named Computer2 that runs Windows 10. User2 joins Computer2 to contoso.com by using [email protected].
Computer1 contains a folder named Folder1. Folder1 is in drive C and is shared as Share1. Share1 has the permission shown in the following table.
A user named User2 has a computer named Computer2 that runs Windows 10. User2 joins Computer2 to contoso.com by using [email protected].
User2 attempts to access Share1 and receives the following error message: "The username or password is incorrect."
You need to ensure that User2 can connect to Share1.
Solution: You create a local user account on Computer1 and instruct User2 to use the local account to connect to Share1.
Does this meet the goal?
- A. No
- B. Yes
Answer: A
NEW QUESTION 164
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
Username and password
Use the following login credentials as needed:
To enter your password, place your cursor in the Enter password box and click on the password below.
Username: Contoso/Administrator
Password: Passw0rd!
The following information is for technical support purposes only:
Lab Instance: 11145882
You need to ensure that the File History of Contoso\Administrator on Client1 is backed up automatically to
\\DC1\Backups.
To complete this task, sign in to the required computer or computers.
Answer:
Explanation:
See explanation below.
Explanation
How to set up and enable File History
1. On Client1, go to Start > Settings > Update & Security.
2. Select Backup and click "Add a drive."
3. Select the drive or network location (\\DC1\Backups) you want to use for File History's backups.
Now click "More options." Here you can start a backup, change when your files are backed up, select how long to keep backed up files, add or exclude a folder, or switch File History to a different drive.
Click the "Back up now" button to start your first File History backup.
Reference:
https://lifehacker.com/how-to-back-up-your-computer-automatically-with-windows-1762867473
NEW QUESTION 165
You have a computer named Computer1 that runs Windows 10.
Computer1 has the local users shown in the following table.
Which users can analyze the event logs on Computer1? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
References:
https://docs.microsoft.com/en-us/windows/security/identity-protection/access-control/local-accounts#sec-localsystem
NEW QUESTION 166
A user has a computer that runs Windows 10.
When the user connects the computer to the corporate network, the user cannot access the internal corporate servers. The user can access servers on the Internet.
You run the ipconfig command and receive the following output.
You send a ping request and successfully ping the default gateway, the DNS servers, and the DHCP server.
Which configuration on the computer causes the issue?
- A. the IPv4 address
- B. the default gateway address
- C. the subnet mask
- D. the DNS servers
Answer: D
NEW QUESTION 167
You have computers that run Windows 10 and are configured as shown in the following table.
You have a removable USB drive named USBDrive1 that is encrypted by using BitLocker to Go.
You plan to use USBDrive1 on Computer1, Computer2, and Computer3.
You need to identify on which computers you can enable automatic unlocking of BitLocker on USBDrive1.
Which computers should you identify?
- A. Computer3 only
- B. Computer2 and Computer3 only
- C. Computer1, Computer2, and Computer3
- D. Computer1 and Computer3 only
Answer: D
Explanation:
Explanation
The BitLocker key is stored in the registry when you enable auto-unlock but only if the operating system drive is encrypted with BitLocker. A TPM is not required.
NEW QUESTION 168
You have three computers that run Windows 10 as shown in the following table.
All the computers have C and D volumes. The Require additional authentication at startup Group Policy settings is disabled on all the computers.
Which volumes can you encrypt by using BitLocker Drive Encryption (BitLocker)? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
References:
https://www.windowscentral.com/how-use-bitlocker-encryption-windows-10
NEW QUESTION 169
You have a computer named Computer1 that runs Windows 10. Computer1 contains a folder named Folder1.
You need to log any users who take ownership of the files in Folder1.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. From a Group Policy object (GPO), configure the Audit Sensitive Privilege Use setting.
- B. From a Group Policy object (GPO), configure the Audit File System setting.
- C. Install the Remote Server Administration Tools (RSAT).
- D. Modify the Advanced Security Settings for Folder1.
- E. Modify the folder attributes of Folder1.
Answer: A,D
Explanation:
References:
https://docs.microsoft.com/en-us/windows/security/threat-protection/auditing/audit-sensitive-privilege-use
NEW QUESTION 170
You have the computer shown in the following table.
You plan to configure deployment rings for Windows 10 quality and feature updates.
What is the maximum number of days you can defer installing quality updates, and which computers support installing feature updates from Windows Update? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/windows/deployment/update/waas-configure-wufb
NEW QUESTION 171
Your company has a main office and a branch office. The offices connect to each other by using a WAN link.
Access to the Internet is provided through the main office.
The branch office contains 25 computers that run Windows 10. The computers contain small hard drives that have very little free disk space.
You need to prevent the computers in the branch office from downloading updates from peers on the network.
What should you do?
- A. Configure the updates to use the Semi-Annual Channel (Targeted) channel.
- B. From the Settings app, modify the Delivery Optimizations settings.
- C. Configure the computers to use BranchCache in hosted cache mode.
- D. Configure the network connections as metered connections.
Answer: C
Explanation:
References:
https://docs.microsoft.com/en-us/windows/deployment/update/waas-branchcache
NEW QUESTION 172
......
Prepare for your Microsoft certification with the updated PassTestking MD-100 exam questions: https://drive.google.com/open?id=1le2Dm7EIXpacYW83VPbaK_XZFRzwbx2l
Get Latest MD-100 Dumps Exam Questions in here: https://www.passtestking.com/Microsoft/MD-100-practice-exam-dumps.html