Pass ISQI CTFL-AcT Exam With Practice Test Questions Dumps Bundle
2022 Valid CTFL-AcT test answers & ISQI Exam PDF
NEW QUESTION 21
Which one of the following sentences describes BEST a major advantage when business analysts and testers review the acceptance criteria together?
- A. The review of acceptance criteria is a good practice to improve the quality of test reports.
- B. The review of acceptance criteria helps to verify that acceptance test cases cover business processes, business rules and business risks.
- C. A shared vision between the business analyst and the tester on acceptance criteria facilitates the design of acceptance test cases.
- D. A joint review ensures that non-functional quality criteria are taken into account.
Answer: C
NEW QUESTION 22
As an acceptance tester you want to test the $100 withdrawal process described by the following Business Process Model and Notation (BPMN) model.
You would like to achieve the following coverage criterion "execute all possible process tasks". Consider the following test cases:
Test 1: balance = $100, receipt = YES
Test 2: balance = $120, receipt = NO
Test 3: balance = $85
Test 4: balance = $20, receipt = YES
Which of the following is the minimal set of test cases allowing to achieve required coverage?
- A. Test 1, Test 3
- B. Test 1, Test 2, Test 3
- C. Test 1, Test 2, Test 4
- D. Test 2, Test 4
Answer: A
NEW QUESTION 23
As a tester you participate in the project of the decision support system for granting a loan. You are asked to review the acceptance criteria for the following requirement:
REQ 3.28. The automated system records critical credit application data (CCAD. needed to support application screening.
Assume that it is well known what kind of data CCAD are. Which of the following would be the BEST example of an acceptance criterion for this requirement?
- A. The process for collecting CCAD meets corporate usability guidelines.
- B. The CCAD is not recorded if it is incomplete and a message is displayed.
- C. The CCAD are stored in the MySQL relational database after each successful data entry procedure.
- D. The CCAD record process is quick and reversible.
Answer: B
NEW QUESTION 24
Which of the following techniques is most likely applied to ensure the quality of acceptance testing activities?
- A. Checklist-based verification of requirements to ensure their completeness and quality.
- B. Eye tracking to verify the feasibility of previously defined user acceptance tests.
- C. Verification of the traceability between user stories and test cases to make sure it is up to date.
- D. Review of the source code to ensure traceability of user stories to system components.
Answer: C
NEW QUESTION 25
Which of the following information is most likely part of an acceptance test summary report?
- A. Technical details on defect fixes.
- B. Test procedure information.
- C. Test strategy and test design methods.
- D. Information to evaluate the level of risk for product release.
Answer: D
NEW QUESTION 26
How does ISTQB CTFL test activities relate to the IQBBA FL business analysis and requirements engineering activities?
- A. Business analysts and tester have to decide, whether they follow the IQBBA or ISTQB lifecycle processes, because they exclude each other.
- B. Test analysis and test design activities may result in changes of acceptance criteria.
- C. The IQBBA solution evaluation phase precedes the ISTQB test implementation and test execution activities.
- D. Business analysts who follow the IQBBA requirements engineering process will not be involved in designing test cases.
Answer: B
NEW QUESTION 27
Which one of the following statements describes the relation between business goals, business needs and requirements BEST?
- A. Business goals, business needs and requirements describe at different levels of abstraction, what shall be achieved.
- B. Business needs address the business solution whereas business requirements define the business problem or opportunity.
- C. Business goals and business needs are synonyms.
- D. To derive the business needs, the business analyst first has to understand the business goals and requirements.
Answer: A
NEW QUESTION 28
Which one of the following statements regarding the quality of requirements is MOST correct?
- A. Vague or ambiguous requirements may lead to misunderstandings both during implementation and testing.
- B. In Agile development lifecycle models, requirement engineering becomes less important due to the product owner role.
- C. INVEST is a technique that ensure the quality of user stories or requirements, thus replacing regular reviews.
- D. Testers may complete unclear requirements by assumptions, as long as they discuss those assumptions with at least one stakeholder.
Answer: A
NEW QUESTION 29
The project team is currently facing a difficult situation originating from their difficulty in envisioning the future and the necessary steps to reach it together with a certain loss of motivation due to a strong feeling of stagnation. You try to unlock the situation by proposing a workshop. Which one would fit the best?
- A. You draw a staircase with 11 steps, each of them representing a major milestone of the project. The bottom of the stairs corresponds to the first day of the project and the upper step means that the project is released. You locate the present situation in the middle of the stairs. The team is asked to identify and discuss the major steps down and up.
- B. You organize a day out with challenging physical exercises practiced in teams followed by an afterwork dinner and drink. After all, nothing is best for motivation than hard times together, strong common objectives and a promise of good time.
- C. You visualize all remaining major milestones of the project, starting with today and ending with project release. Then, you ask the team to identify and discuss the necessary actions to move forward from the present situation and to reach the milestones.
- D. You ask two volunteers to play a part in front of the team. One will try to defend the project and propose positive arguments and ways forward. The other will do the opposite. You then recapitulate the major arguments of both sides and debate them openly with the team.
Answer: A
NEW QUESTION 30
As an acceptance tester you want to test the $100 withdrawal process described by the following BPMN model.
You would like to achieve decision coverage. Consider the following test cases: Test 1: balance = $100, receipt = YES Test 2: balance = $99 Test 3: balance = $120, receipt = NO Test 4: balance = $2500, receipt = YES Which of the following is the minimal set of test cases allowing to achieve full decision coverage?
- A. Test 1, Test 2, Test 3
- B. Test 2, Test 3
- C. Test 1, Test 2, Test 4
- D. Test 1, Test 2
Answer: A
NEW QUESTION 31
Which of the following is the BEST example of a Gherkin-style test for a web-based banking application?
- A. GIVEN I have $5000 on my personal account X AND I have $200 on my personal account Y WHEN I transfer $1000 from X to Y THEN I should have balance $4000 on my personal account X AND I should have balance $1200 on my personal account Y
- B. GIVEN I have $5000 on my personal account X AND I have $200 on my personal account Y WHEN I click 'Make transfer' button AND I enter '3000' into 'Amount' field AND I enter 'X' into 'From which account' field AND I enter 'Y' into 'To which account' field AND I click 'Confirm transaction' button THEN I should have balance $2000 on my personal account X AND I should have balance $3200 on my personal account Y
- C. GIVEN I have $5000 on my personal account X WHEN I have $600 on my personal account Y THEN I have $5600 in total on my personal accounts X and Y
- D. GIVEN I have $5000 on my personal account X and $600 on my personal account Y WHEN I transfer
$500 from Y to X
THEN I should have balance $4500 on X and balance $1100 on Y
Answer: A
NEW QUESTION 32
Which of the following sentences explains BEST how business process and business rule modeling can be used for ATDD?
- A. In an ATDD approach, business process/rule models must be created before the project starts.
- B. In an ATDD approach, process models are created for initial test design but are not maintained afterwards.
- C. In an ATDD approach, business process models replace acceptance criteria.
- D. In an ATDD approach, testers use business process and business rule models to generate acceptance tests.
Answer: D
NEW QUESTION 33
Which of the following statements regarding defects is MOST correct?
- A. Regular meetings between business analysts and testers are necessary to report discrepancies between actual and expected outcome.
- B. Testers should provide accurate information regarding the difference between the expected test result and the actual result.
- C. If the defect turns out to be a bug, the tester writes a defect report and sends it to the business analyst for further investigation.
- D. The tester should analyze the potential impact of a defect on system usage, before communicating it to the business analyst.
Answer: B
NEW QUESTION 34
Which one of the following acceptance criteria relates to security requirements?
- A. Normal users shall have restricted access to private data.
- B. The system's response time shall not exceed 3 seconds.
- C. The system shall be web-based.
- D. The graphical user interface shall comply with corporate style guides.
Answer: A
NEW QUESTION 35
Which one of the following usability testing techniques matches the test objective BEST?
- A. Biometrics-based evaluation help to understand retrospectively, how users interacted with the system and to improve it.
- B. Expert reviews help to understand how users interact with a system and what is more or less visible.
- C. Log file analysis performed by usability experts identifies strong points of an interface that attract the user's attention.
- D. Walkthrough and thinking aloud methods can indicate difficulties users experience with certain tasks.
Answer: D
NEW QUESTION 36
Which one of the following statements describes correctly how acceptance testing may be augmented with other test techniques or approaches?
- A. In a priority-based testing approach, prioritization of acceptance tests depends on identified product risks.
- B. In a model-based testing approach, acceptance tests are generated from graphical or textual models.
- C. In a risk-based testing approach, acceptance criteria are derived from the tester's experience and intuition.
- D. In a black-box testing approach, acceptance test scenarios follow the implemented sequence of function calls in the code.
Answer: B
NEW QUESTION 37
......
Top ISQI CTFL-AcT Courses Online: https://www.passtestking.com/ISQI/CTFL-AcT-practice-exam-dumps.html
Free ISQI CTFL-AcT Exam Questions and Answer from Training Expert PassTestking: https://drive.google.com/open?id=1afPFzyGMWzRa_tfEP0KM2ZlqzSKnh3a7