[Oct-2022] Network Appliance NS0-593 Official Cert Guide PDF
Exam NS0-593: NetApp Certified Support Engineer ONTAP Specialist - PassTestking
NetApp NS0-593 Exam Topics:
| Section | Objectives |
|---|---|
| Software-defined ONTAP Solutions | - Describe software-defined ONTAP solutions |
| Protocols | - Demonstrate knowledge of ONTAP NAS configurations - Demonstrate knowledge of ONTAP SAN configurations - Demonstrate knowledge of S3 server configurations |
| Hardware | - Demonstrate knowledge of hardware troubleshooting - Demonstrate knowledge of troubleshooting SP or BMC - Describe the hardware components in a Fibre Channel environment - Demonstrate knowledge of the cluster interconnect infrastructure - Describe MetroCluster configurations |
| ONTAP OS | - Describe the tools available for support or troubleshooting - Demonstrate knowledge of ONTAP cluster administration - Demonstrate knowledge of data replication issues - Describe the structure of ONTAP OS - Demonstrate knowledge of how to troubleshoot ONTAP OS - Demonstrate knowledge of how to handle panic events |
| Performance | - Describe ONTAP performance concepts - Demonstrate knowledge of troubleshooting ONTAP performance |
NEW QUESTION 11
Your customer Informs you about SnapMlrror problems after upgrading NetApp ONTAP software to a newer
version. After investigating the event logs and the SnapMirror history, you see information about delayed
updates of the SnapMirror relationships.
How would your customer prevent such problems in the future?
- A. Verify that the cabling of the hardware port that Is responsible for SnapMirror transfers Is correct.
- B. Quiesce the SnapMirror relationships before upgrading the ONTAP software.
- C. Delete the SnapMirror relationships and create them new after upgrading the ONTAP software.
- D. Modify the schedules of the SnapMirror relationships after upgrading the ONTAP software.
Answer: A
NEW QUESTION 12
You are optimizing your Cloud Volumes ONTAP. For interoperability and consolidation purposes, you need
to know the storagelimits.
In this scenario, which source should be reviewed?
- A. NetApp Cloud Volumes ONTAP Release Notes
- B. Hardware Universe
- C. Interoperability Matrix Tool (IMT)
- D. Cloud Central
Answer: A
NEW QUESTION 13
A customer enabled NFSv4.0on an SVM and changed the client mount from NFSv3 to NFSv4. Afterwards,
the customer found that the directory owner was changed from root to nobody.
In this scenario, which statement is true?
- A. The clients must be restarted to start using NFSv4.
- B. The ID mapping domains do not match between the client and server.
- C. The export policy is not configured properly.
- D. The customer did not configure name services on the SVM.
Answer: C
NEW QUESTION 14
You receive the "Unable to connect to the management gateway server"error when trying to connect to a node
management IP.
In this situation, how do you determine whether core dumps are generated for the mgwd user space process?
- A. Log in to the clustershell using the node console and collect the core dumps from the clustershell.
- B. Log in to the systemshell and collect core dumps from thesystemshell.
- C. Log in to the nodeshell using the node console and collect the core dumps from the nodeshell.
- D. Log in to the service processor and collect the core dumps from the service processor.
Answer: D
NEW QUESTION 15
You have a 4-node NetApp ONTAP 9.8 cluster with an AFF A400 HA pair and a FAS8300 HA pair with 16
TB NL-SAS drives. You are asked to automatically tier 150 TB of Snapshot copy data from the AFF A400
aggregates to the FAS8300.
In this scenario, which ONTAP license must be added to the cluster to accomplish this task?
- A. VE license
- B. TPM license
- C. FabricPool license
- D. S3 license
Answer: B
NEW QUESTION 16
Your customer mentions that they have accidentally destroyed both rootaggregates in their two-node cluster.
In this scenario, what are two actions that must be performed? (Choose two.)
- A. Re-create the cluster from the local backup.
- B. Install ONTAP from a USB device.
- C. Rejoin the second node to the re-created cluster.
- D. Re-create the cluster from the remote backup.
Answer: B,C
NEW QUESTION 17
Which two throughput elements are controlled by host applications? (Choose two.)
- A. concurrency
- B. latency
- C. Jitter
- D. operation size
Answer: B,C
NEW QUESTION 18
You have a customer who is concerned with high CPU and disk utilization on their SnapMirror destination
system. They are worried about high CPU and disk usage without any user operations.
In this situation, what should you tell the customer?
- A. Suggest that the customer manually cancel any scanners on the destination to reduce CPU usage.
- B. Explain that background tasks such as SnapMirror throttle up in the absence of user workload.
- C. Explain that only user workload should use the CPU and Investigate further.
- D. Suggest that the customer throttle their SnapMirror relationships to reduce resource consumption.
Answer: A
NEW QUESTION 19
A customer wants to connect a NetApp AFF A700 system to a 40GbE switch. The controllers have a 10/40G
Ethernet card in slot 4 for this purpose. The link comes up fine on node 2,but it will not come up on node 1.
You look at the AutoSupport data for the nodes in question and see the output shown in the exhibit.
What is the cause of the customer's problem?
- A. The ports are configured for 4x10Gbit instead of 40Gbit.
- B. The incorrect cable is used.
- C. The cable is plugged in upside down.
- D. The port has an incorrect SFP inserted.
Answer: A
NEW QUESTION 20
A user mentions that their home drive, that Is an export within a volume, is no longer allowing them to save
files. The drive reports that it Is full, even though It shows that minimal data is written to it.
Which statement would explain this behavior?
- A. The client system needs to remount the export to show the proper space.
- B. Other files within the volume are also owned by the user, exceeding the user quota.
- C. Other users wrote to this user's home drive.
- D. The mount is stale and uses a cached version of the volume.
Answer: B
NEW QUESTION 21
You have recently discovered that NetApp ONTAP Cloud Manager is not sending AutoSupport messages to
NetApp.
In this scenario, what would solve this Issue?
- A. Verify that the inbound and outbound rules allow AutoSupport on port 80.
- B. Verify that your AWScredentials are correctly added to Cloud Manager.
- C. Verify that your NetApp Support site credentials are correctly added to Cloud Manager.
- D. Verify that your data LIFs allow traffic to mysupport .netapp.com on port 443.
Answer: D
NEW QUESTION 22 
Referring to the exhibit, what do you need to do to return the MetroCluster to a normal state?
- A. Enter the metrocluster switchback command on Site A.
- B. Enter the storage failover giveback command on Site A.
- C. Enter the storage failover giveback command on Site B.
- D. Enter the metroclustor switchback command on Site B.
Answer: A
NEW QUESTION 23
After a normal power down of both nodes forbuilding maintenance, Node01 of a 2-node cluster cannot be
powered back up; however, all disk shelves are powered.
Which action should be performed to bring the cluster online and allow Node02 to serve data?
- A. Reboot the node With the system node reboot -node Node02 -bypass-optimization true command.
- B. Recreate the cluster with the system configuration recovery cluster recreate -from node command.
- C. Perform a takeover with the storage failover takeover -ofnode Node01 -option forcecommand.
- D. Reinitialize the cluster with option 4a from the boot menu.
Answer: B
NEW QUESTION 24
You have a customer complaining of long build times from their NetApp ONTAP-based datastores. They
provided you packet traces from the controller and client. Analysis of these traces shows an average service
response time of 1 ms. QoS outputconfirms the same. The client traces are reporting an average of 15 ms in
the same time period.
In this situation, what would be your next step?
- A. A sync core should be triggered.
- B. The cluster interconnects should be investigated.
- C. The cluster is responding slowly and requires further investigation using performance archives.
- D. The client that reports high latency should be investigated.
Answer: D
NEW QUESTION 25
Your customer is running a NetApp AFF A800 system with NetAppONTAP 9.8 software and states that their
NS224 shelf is not showing with the correct shelf ID. You analyze the data and the shelf shows an
identification of "1.SHFHUXXXXXXXXXX."
What is the cause of the reported Issue?
- A. A new shelf was added to the controller.
- B. The shelf had a disk replaced too quickly.
- C. The shelf has been power cycled.
- D. The shelf was cabled Incorrectly.
Answer: A
NEW QUESTION 26
Your customer added a new DS4246 shelf to their FAS2750 single-node system and created a new aggregate
on the new shelf. Two weeks later, they log into Active IQ and discover the Medium Impact error shown
below.
Shelves with both connections via the same SAS path detected
Referring to the exhibit, which statement is correct?
- A. This situation is normal for a FA57750 single-node system.
- B. In a FAS2750 system, the internal shelf is only seen on one path, and the external shelves are seen on
two paths. - C. Active IQ Is not aware of the shelf configuration for a single-node system.
- D. The cables are cabled Incorrectly on the SAS stack.
Answer: A
NEW QUESTION 27
You have a 2-node NetApp FAS2750 switchless cluster with twenty-four 1.8 TB disks that is experiencing
performance issues. Upon investigation, you discover severaltype B consistency points.
Referring to the exhibit, which corrective action would address these consistency points?
- A. Add an additional shelf oftwenty-four 1.8 TB disks.
- B. Create additional data LIFs.
- C. Replace the twenty-four 1.8 TB disks with twelve 4 TB disks.
- D. Convert the 2-node switchless cluster to a 2-node switched cluster.
Answer: A
NEW QUESTION 28
You have connection Issues from a Linux host to an AFF A400 FC LUN. You are asked by support to run the
NetApp sanlun command to provide troubleshooting information.
Which NetApp software package must be installed on the host?
- A. Virtual Storage Console
- B. Host Utilities package
- C. SnapDrive for UNIX
- D. Inventory Collect Tool
Answer: B
NEW QUESTION 29
You Just used the CLI to create a NetApp ONTAP FlexGroup Volume on a NetApp Cloud Volumes ONTAP
instance. After creation, you notice odd behavior in NetApp Cloud Manager.
In this scenario,what Is the reason for this behavior?
- A. Cloud Volumes ONTAP does not support FlexGroup volumes.
- B. The Capacity Management Mode within Cloud Manager should be set to Manual.
- C. The Capacity Management Mode within Cloud Manager should be set to Automatic.
- D. Cloud Manager must be used to provision the FlexGroup volume.
Answer: D
NEW QUESTION 30
Your customer has mounted an NFS SVM from a Linux client unci performance is very poor. The customer is
certain that they have jumbo frames enabled. They have verified an MTU of 9000 on both the Linux client and
the broadcast domain on the NetApp ONTAP 9.8 cluster.
Referring to the exhibit, which ONTAP command will help isolate a possible MTU mismatch?
- A.
- B.
- C.
- D.
Answer: D
NEW QUESTION 31
......
Free NS0-593 Exam Dumps to Improve Exam Score: https://www.passtestking.com/NetworkAppliance/NS0-593-practice-exam-dumps.html
2022 Realistic NS0-593 Dumps Exam Tips Test Pdf Exam Materials: https://drive.google.com/open?id=1kcJW_QK2i-bKiFb-iDgY25FNCqt6QXas