Latest [Nov 07, 2021] Real VMware 3V0-42.20 Exam Dumps Questions
3V0-42.20 Dumps To Pass VCAP-NV Design 2020 Exam in One Day (Updated 58 Questions)
For more info about Advanced Design VMware NSX-T Data Center 3.0
Advanced Design VMware NSX-T Data Center 3.0
Certification Path for Advanced Design VMware NSX-T Data Center 3.0
The following pre-requisites need to be completed before you sit for the exam:
- Attend one of the training courses
- Earn the VCP-NV 2021 (Or hold a VCP-NV 2020)
- Pass one of the Advanced VMware Design NSX-T Data Center exam
NEW QUESTION 30
Refer to the exhibits.
Design Option1:
Design Option 2:
Design Option 3:
Design Option 4:
An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution.
The conceptual design includes these requirements, assumptions, constraints, and risks:
* Critical applications must run across sites without changing IP address.
* Business continuity and disaster recovery (BCDR) plans will leverage a second site running vSphere.
* RTO/RPO must be reduced for recovery of applications on secondary site.
* IT Teams require automation tools for configuration.
Which Conceptual Design would the architect recommend to the customer? (Choose the best answer.)
- A. Design Option 2
- B. Design Option 4
- C. Design Option 3
- D. Design Option 1
Answer: D
NEW QUESTION 31
An administrator is asked to improve Recovery Point Objective (RPO) and Recovery Time Objective (RTO) for Disaster Recovery (DR) in their company network. The network has a primary site and a secondary site. The ability to support outages with minimum loss of connectivity to the company's core application is a priority.
Which design should the administrator recommend? (Choose the best answer.)
- A. NSX-T Data Center using built-in standard automation DR and secondary site recovery setup.
- B. NSX-T Data Center using Federation and dependencies set between primary and secondary sites.
- C. NSX-T Data Center using a registered third-party DR solution.
- D. NSX-T Data Center using an Orchestrator to recover VMs across sites.
Answer: B
NEW QUESTION 32
What selection is the key design benefit provided by a dedicated Edge Cluster VM or Bare Metal? (Choose the best answer.)
- A. reduced administrative overhead
- B. support for Edge Node Clusters with more than 10 Edge Nodes
- C. multiple Tier-0 gateways per Edge Node Cluster
- D. predictable network performance
Answer: D
NEW QUESTION 33
Which two VMware recommendations should an architect follow when configuring top of rack (ToR) switches in an NSX-T Data Center environment? (Choose two.)
- A. Configure switch ports with a Dynamic Trunking Protocol.
- B. Use only IPv4 addressing in all deployments.
- C. Configure redundant physical switches to enhance availability.
- D. Modify the Spanning Tree Protocol to increase the time to transition to the forwarding state.
- E. Configure switch ports that connect to ESXi host manually as trunk ports.
Answer: A,D
NEW QUESTION 34
Refer to the exhibit.
A financial company is adopting micro-services with the intent of simplifying network security. An NSX-T architect is proposing a NSX-T Data Center micro-segmentation logical design. The architect has created a diagram to share with the customer.
How many security levels will be implemented according to this Logical Design? (Choose the best answer.)
- A. 3 levels
- B. 9 levels
- C. 5 levels
- D. 4 levels
Answer: C
NEW QUESTION 35
An architect is helping an organization with the Physical Design of an NSX-T Data Center solution.
This information was gathered during a workshop about ESXi Host networking:
* A total of 50 ESXi hosts to be configured as Transport Nodes.
* All ESXi hosts have a dedicated 2 × Intel 10Gbps Physical Network adapter for the Overlay Traffic.
To achieve low latency, high throughput, redundancy, and performance, which two NIC teaming policies should the architect recommend? (Choose two.)
- A. Load Balance Port ID
- B. Load Balance Source
- C. Load Balance Source Port ID
- D. Failover Order
- E. Load Balance Source MAC
Answer: C,D
NEW QUESTION 36
An architect is helping an organization with the Logical Design of an NSX-T Data Center solution.
This information was gathered during the Assessment Phase:
* Maximum performance and availability is required between the physical and virtual network.
* Load Balancing service is required for back-end web servers.
* NAT is required.
Which selection should the architect include in their design? (Choose the best answer.)
- A. Create two separate VLANs to connect the Tier-0 gateway upstream traffic and configure ECMP.
- B. Deploy a Tier-1 gateway and connect it to an Active/Active Tier-0 gateway with ECMP configured.
- C. Deploy an Active/Standby Tier-0 gateway and configure ECMP.
- D. Deploy an Active/Active Tier-0 gateway and configure ECMP.
Answer: C
Explanation:
Explanation/Reference:
NEW QUESTION 37
An architect is helping an organization with the Physical Design of an NSX-T Data Center solution.
This information was gathered during a workshop:
Current hypervisor of choice is KVM.
Cost reduction is important.
Which two selections should the architect recommend to the organization? (Choose two.)
- A. Deploy Edge VM Nodes using ISO.
- B. Deploy NSX Manager using QCOW2.
- C. Deploy bare metal Edge Nodes.
- D. Deploy NSX Manager using OVF.
- E. Deploy Edge VM Nodes on KVM.
Answer: B,C
NEW QUESTION 38
Which three choices are non-functional requirements? (Choose three.)
- A. certification
- B. authentication
- C. authorization
- D. cost
- E. scalability
- F. availability
Answer: A,C,E
NEW QUESTION 39
A Solution Architect will be deploying an Ethernet Virtual Private Network (EVPN) in their NSX-T Data Center environment.
What two selections must be prepared for the EVPN deployment? (Choose two.)
- A. deployed Tier-0 gateway
- B. remote gateway with support for IGP and VLAN priority
- C. deployed Tier-1 gateway
- D. deployed Load Balancer
- E. remote gateway with support for MP-BGP and VXLAN
Answer: D,E
Explanation:
Explanation/Reference: https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf
NEW QUESTION 40
An architect is helping an organization with the Physical Design of an NSX-T Data Center solution.
This information was gathered during a workshop about ESXi Host networking:
A total of 50 ESXi hosts to be configured as Transport Nodes.
All ESXi hosts have a dedicated 2 * Intel 10Gbps Physical Network adapter for the Overlay Traffic.
To achieve low latency, high throughput, redundancy, and performance, which two NIC teaming policies should the architect recommend? (Choose two.)
- A. Load Balance Port ID
- B. Load Balance Source
- C. Load Balance Source Port ID
- D. Failover Order
- E. Load Balance Source MAC
Answer: C,D
NEW QUESTION 41
Which three choices are part of a Design Approach when discussing design alternatives and their effects? (Choose three.)
- A. security
- B. backup
- C. budget
- D. knowledge
- E. cost
- F. performance
Answer: A,D,F
NEW QUESTION 42
An architect is helping an organization with the Physical Design of an NSX-T Data Center solution.
This information was gathered during a workshop:
There are six hosts and hardware has already been purchased.
Customer is planning a collapsed Management/Edge/Compute cluster.
Each host has two 10Gb NICs connected to a pair of switches.
There should be no single point of failure in any proposed design.
Which virtual switch design should the architect recommend to the organization? (Choose the best answer.)
- A. Create a vSphere Distributed Switch (vDS) for Management VMkernel traffic and assign one NIC. Also, create an NSX-T Virtual Distributed Switch (N-VDS) for overlay traffic and assign one NIC.
- B. Create an NSX-T Virtual Distributed Switch (N-VDS) for Management VMkernel and overlay traffic and assign a new virtual NIC.
- C. Create an NSX-T Virtual Distributed Switch (N-VDS) for Management VMKernel and overlay traffic and assign both NICs.
- D. Create an NSX-T Virtual Distributed Switch (N-VDS) for Management VMkernel traffic and assign one NIC. Also, create an NSX-T Virtual Distributed Switch (N-VDS) for overlay traffic and assign one NIC.
Answer: A
NEW QUESTION 43
Which two protocols are typically used for multicast in a NSX-T Data Center environment? (Choose two.)
- A. PIM Sparse mode
- B. IGMPv3
- C. IGMPv2
- D. PIM Dense Mode
- E. PIM Full Form
Answer: A,C
Explanation:
Explanation/Reference: https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-6AAC3360-
4F79-4FBF-BCC1-0D8C220B0621.html
NEW QUESTION 44
An architect is helping an organization with the Logical Design of an NSX-T Data Center solution.
This information was gathered during the Assessment Phase:
There isn't much budget available for a new off shore site.
The new site is decentralized and no communication with the main data center is required.
The design will need to cater for availability, upgrades, and failure scenarios.
N+1 must be maintained at all times.
Which three selections should the architect recommend in their design? (Choose three.)
- A. Install a minimum of 3 ESXi hosts in the site.
- B. A Shared Edge/Management cluster and one for Compute.
- C. Collapse the Management/Edge/Compute cluster.
- D. Install a minimum 4 ESXi hosts in the site.
- E. Make all pNICs part of N-VDS and VMKs will be migrated.
- F. Separate the hosts physical NICs for VSS and N-VDS.
Answer: C,E,F
NEW QUESTION 45
......
3V0-42.20 Exam Brain Dumps - Study Notes and Theory: https://www.passtestking.com/VMware/3V0-42.20-practice-exam-dumps.html
100% Guaranteed Results 3V0-42.20 Unlimited 58 Questions: https://drive.google.com/open?id=14Gvef0OIlbRcjZb3BZs4od_xJLmBvFq1