JN0-1362 Braindumps PDF, Juniper JN0-1362 Exam Cram [Q41-Q63]

Share

JN0-1362 Braindumps PDF, Juniper JN0-1362 Exam Cram

New 2021 JN0-1362 Sample Questions Reliable JN0-1362 Test Engine

NEW QUESTION 41
You are preparing to purchase WAN services from a service provider You are required to protect all Layer 2 and higher traffic from injection wiretapping, man-in-the-middle, and playback type attacks.
Which solution would satisfy this requirement?

  • A. Use Layer 2 VPN services from the service provider.
  • B. Use MACsec between locations.
  • C. Use IPsec between locations.
  • D. Use Layer 3 VPN services from the service provider

Answer: C

 

NEW QUESTION 42
You are asked to design a Cloud CPE solution that can dynamically add new sites to an existing MPLS Layer 3 VPN. The CPE for each new site must support the service chaining of multiple VNFs.
Which Juniper Networks Cloud CPE solution supports these requirements?

  • A. Distributed Cloud CPE - Managed Internet
  • B. SD-WAN
  • C. Centralized Cloud CPE
  • D. Distributed Cloud CPE - Option 1

Answer: D

 

NEW QUESTION 43
What are three limitations of using the Internet as the primary WAN service for enterprise organizations? (Choose three)

  • A. no quality of service guarantees
  • B. generally higher cost
  • C. lack of connectivity
  • D. no latency considerations
  • E. no inherent security

Answer: B,C,D

 

NEW QUESTION 44
What are three components of a class-of-service scheduler? (Choose three.)

  • A. policing rate
  • B. queue priority
  • C. forwarding class
  • D. delay buffer size
  • E. transmit rate

Answer: B,D,E

Explanation:
Junos OS schedulers allow you to define the priority, bandwidth, delay buffer size, rate control status, and RED drop profiles to be applied to a particular queue for packet transmission

 

NEW QUESTION 45
Your customer requires virtual machine mobility between two data centers, and they are pursuing a managed service.
Which solution would satisfy the customer's requirement?

  • A. an EVPN service provided over IP
  • B. a routed service
  • C. an L3VPN service
  • D. an IPsec VPN service between CE routers

Answer: C

 

NEW QUESTION 46
Your customer is paying for traffic prioritization and you must ensure that all traffic from their 172.27.10.0/24 network receives top priority through your network.
Which action will satisfy this requirement?

  • A. Apply a multifield classifier to the ingress interfaces.
  • B. Apply a custom rewrite rule to the ingress interface.
  • C. Apply a behavior aggregate classifier to the egress interface.
  • D. Apply a custom scheduler map to the ingress interface.

Answer: A

Explanation:
We would need MF to match the address and set the forwarding class.

 

NEW QUESTION 47
Which statement is correct regarding classifiers in CoS?

  • A. Classifiers are used to route traffic between routing instances.
  • B. Classifiers are used to separate traffic into different forwarding classes.
  • C. Classifiers are used to define the transmit rate for forwarding classes.
  • D. Classifiers are used to change DiffServ values on outgoing packets.

Answer: B

 

NEW QUESTION 48
You work for a service provider and are designing an L3VPN with Internet access solution for a customer using Provider Independent (PI) IPv6 space.
Which networking designs will work for this customer?

  • A. Use NAT64 to convert PI space to IPv4 internet addresses, set up 6VPE routing instances on your PE routers for the customer.
  • B. Use NAT64 to convert PI space to your public IPv6 space set up 6VPE routing instances on your PE routers for the customer
  • C. Use NAT66 to convert PI space to your public IPv6 space set up 6PE on your PE routers to transport IPv6 traffic natively.
  • D. Use NAT64 to convert PI space to IPv4 Internet addresses set up 6PE on your PE routers to transport IPv4 traffic natively.

Answer: A

 

NEW QUESTION 49
Click the Exhibit button:

Referring to the exhibit, which mechanism is used to advertise routes from the enterprise network to the service provider network?

  • A. BGP import policies
  • B. BGP flowspec
  • C. BGP export policies
  • D. firewall filters

Answer: A

 

NEW QUESTION 50
Which security implementation does Juniper Networks recommend for all core routers in a service provider network?

  • A. unified threat management
  • B. stateless loopback firewall filter
  • C. application firewall
  • D. intrusion and detection prevention

Answer: B

 

NEW QUESTION 51
Exhibit.

Referring to the exhibit considering shared fates, which Internet Transit?

  • A. Customer B
  • B. Customer C
  • C. Customer A
  • D. Customer D

Answer: A

 

NEW QUESTION 52
Exhibit.

Referring to the exhibit, which two methods would be used by the designer of ISP E to ensure that traffic between ISP C and ISP A will traverse through ISP B? (Choose two.)

  • A. Apply the BGP import policy (to EBGP peers) on R4 and R5 to modify the AS PATH attribute so that the path through ISP D is less preferred.
  • B. Apply the BGP import policy (to EBGP peers) on R4 to adjust the ORIGIN for the routes received from ISP B to unknown.
  • C. Apply the BGP export policy (to IBGP peers) on R4 and R5 to adjust the MED on the ISP C routes so that the path through ISP D is less preferred.
  • D. Apply the BGP import policy (to EBGP peers) on R4 anaVor R5 to adjust the local preference on the ISP C routes so that the path through ISP B is more preferred

Answer: A,C

 

NEW QUESTION 53
What are two risks when using a source-based RTBH solution? (Choose TWO)

  • A. The attacker address could be a CGNAT address resulting in a larger service outage for users.
  • B. The target of the attack may not support RTBH.
  • C. The target of an attack would be blocked resulting in a target being offline.
  • D. The attacker's address could be unknown.

Answer: A,B

 

NEW QUESTION 54
A new customer asks that you extend their LAN across your WAN The customer wants to retain administrative control over all routing in their network.
Which two architectures would meet this requirement? (Choose two.)

  • A. public Internet
  • B. Layer 2 VPN
  • C. VPLS
  • D. Layer 3 VPN

Answer: B,C

 

NEW QUESTION 55
You want to migrate your network from using Draft-Rosen to multicast VPN, Due to functional similarities, it will help operations personnel make the transition if they are familiar with certain technologies In this scenario, which technology would be helpful?

  • A. Layer 3 VPNs
  • B. hierarchical VPLS
  • C. Layer 2 VPNs
  • D. VPLS with point-to-multipoint LSPs

Answer: D

 

NEW QUESTION 56
You belong to an organization consisting of multiple sites. Your topology is constantly changing. You need a method of encrypting traffic between sites.
Which technology enables you to add new sites without reconfiguring existing sites?

  • A. IPsec Auto VPN with ADVPN
  • B. point-to-point IPsec VPN
  • C. mesh IPsec overlay VPN
  • D. hub-and-spoke IPsec VPN

Answer: B

 

NEW QUESTION 57
You are designing several MPLS virtual routing and forwarding (VRF) instances on all provider edge (PE) routers. Routes within each VRF should be exchanged between all PE routers provisioned for that VRF.
For each VRF routing instance which two attributes must match on all related PE routers? (Choose two )

  • A. router ID
  • B. VRF target
  • C. instance type
  • D. interfaces

Answer: B,C

 

NEW QUESTION 58
What are two benefits of including analytics in your network management design proposal? (Choose two.)

  • A. Analytics dynamically standardizes software and firmware versions.
  • B. Analytics can be used for troubleshooting and diagnosing network problems
  • C. Analytics can allow administrators to evaluate and optimize WAN resources.
  • D. Analytics dynamically makes network optimization change

Answer: C,D

 

NEW QUESTION 59
You work for a service provider that currently uses a full mesh of IBGP peers to share EBGP routes. You are concerned about future scalability with this model and have decided to use route reflectors to overcome the scale limitations associated with the full mesh model.
In this scenario, which statement is true?

  • A. Private autonomous system numbers must be configured on all IBGP peers.
  • B. Route reflectors do not change existing IBGP next hops by default.
  • C. Cluster IDs must be configured on all IBGP peers.
  • D. Route reflectors readvertise both the active and backup routes

Answer: A

 

NEW QUESTION 60
Which two statements describe why service providers have migrated to IP/MPLS networks? (Choose two.)

  • A. MPLS virtualization allows a service provider to use statistical multiplexing to maximize resource utilization.
  • B. The MPLS ingress router encapsulates IP packets in an MPLS frame and forwards it to the next router in the path.
  • C. MPLS labels enable several logically separated networks to share a common network infrastructure.
  • D. A single router can be an ingress, egress or transit router for multiple LSPs simultaneously.

Answer: A,C

 

NEW QUESTION 61
Which Juniper Networks platform automates the orchestration of compute, storage, and networking resources to create and manipulate OpenStack clouds?

  • A. RingMaster
  • B. NorthStar
  • C. Contrail
  • D. WANDL

Answer: C

 

NEW QUESTION 62
Exhibit.

Which routing protocol design will accomplish these goals?

  • A. Enable a full mesh of IBGP sessions between the routers in ISP B.
  • B. Configure static routes to ISP A on each router within ISP B.
  • C. Redistribute the BGP routes learned from ISP A into the OSPF instance running in ISP B.
  • D. Configure each router in ISP B to peer with a par of route reflectors.

Answer: D

 

NEW QUESTION 63
......

Feel Juniper JN0-1362 Dumps PDF Will likely be The best Option: https://www.passtestking.com/Juniper/JN0-1362-practice-exam-dumps.html