[Feb 12, 2022] NS0-176 Exam Brain Dumps - Study Notes and Theory
Pass Network Appliance NS0-176 Test Practice Test Questions Exam Dumps
NetApp NS0-176 Exam Certification Details:
| Exam Name | Cisco and NetApp FlexPod Implementation and Administration |
| Passing Score | 68% |
| Exam Price | $150 USD |
| Number of Questions | 60 |
| Exam Registration | PEARSON VUE |
NetApp NS0-176 Exam Topics:
| Section | Objectives |
|---|---|
| FlexPod Design | - Describe the storage components supported in FlexPod - Describe the networking components supported in FlexPod - Describe the compute components supported in FlexPod |
| FlexPod Administration | - Demonstrate knowledge of how to administer FlexPod solutions according to FlexPod best practices - Describe FlexPod management applications - Demonstrate knowledge of how to install and upgrade the FlexPod solution |
| FlexPod Troubleshooting | - Demonstrate how to perform FlexPod troubleshooting |
| FlexPod Configuration | - Describe how to install and configure the FlexPod components - Describe how to configure neworks in a UCS solution - Describe how to configure SAN boot in a FlexPod solution - Describe knowledge of how to configure a service profile - Demonstrate knowledge of how to configure storage in a FlexPod solution - Demonstrate knowledge of how to configure Cisco Nexus switches |
NEW QUESTION 51
Given the following switch output, where would you expect see notification level messages?
N5K-1# show logging info.
Logging console: enabled (Severity: error)
Logging monitor: enabled (Severity: informational)
Logging linecard: enabled (Severity: emergency)
Logging fex: enabled (Severity: notifications)
Logging time stamp: seconds
Logging server: disabled
Logging logfile: enabled
- A. On the console
- B. Notification messages will not be seen anywhere
- C. On the terminal sessions
- D. On the linecard
Answer: C
NEW QUESTION 52
Exhibit:
Which hardware component is shown in the exhibit?
- A. FEX
- B. VIC
- C. FI
- D. IOM
Answer: B
NEW QUESTION 53
Which three elements are included in a UCS service profile? (Choose three.)
- A. switch configuration
- B. volume layout
- C. identity information
- D. firmware revisions
- E. server definition
Answer: C,D,E
NEW QUESTION 54
Exhibit:
You just configured a new Storage Virtual Machine named SVM1 on your NetApp cluster to serve up NFS datastores to an ESX cluster.
Your VMware administrator tells you that the ESX servers are unable to access the datastore that you created on node flexpod1-san01-01. The IP address of one of the ESX servers is 10.33.128.100.
Referring to the exhibit, which command would you use to troubleshoot this problem?
- A. ~network ping -lif flexpod1-san01-01 mgmt1 -vserver flexpod1-san01 -destination 10.33.128.100~
- B. ~network ping -lif nfs1 -vserver svm1 -destination 10.33.128.100~
- C. ~network ping -node flexpod1-san01-01 -destination 10.33.128.100~
- D. ~network ping -lif cluster mgmt -vserver flexpodl-san01 - destination 10.33.128.100~
Answer: B
NEW QUESTION 55
To install your VEM, what is the extension of the VEM file name you'll be looking for to complete this install?
- A. .vsm
- B. .vib
- C. .zip
- D. .vem
Answer: B
NEW QUESTION 56
Exhibit:
An administrator is building a FlexPod configuration with UCS 6296 Fabric Interconnect devices that support legacy Fibre Channel 9FC) connections. The administrator uses UCS Manager to configure the unified ports on the Fabric Interconnect.
Referring to the exhibit, how many ports will FC use after the configuration is completed?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 57
Which feature allows Cisco Nexus 7000 Series switches to be virtualized at the device level?
- A. VDC
- B. PONG
- C. VRF
- D. VLAN
Answer: A
NEW QUESTION 58
How are jumbo frames enabled on the Nexus 5548?
- A. system qosmtu 9216
- B. system jumbo-frame
- C. system mtu jumbo 9000
- D. policy-map type queueingclass type queueing class-defaultmtu 9216
- E. policy-map type network-qos JUMBOclass type network-qos class-defaultmtu 9216system qosservice-policy type network-qos JUMBO
Answer: E
NEW QUESTION 59
Which two are two possible features of the 'Call Home' feature in UCS Manager?
- A. Generates a text message to configured cell phone numbers
- B. Generates emails to predefined email addresses when a problem is detected
- C. Allows UCS to proactively pull down new software updates from Cisco
- D. Ability to proactively open a case with the Cisco TAC with the 'Smart Call Home' feature
- E. Generates a syslog event
Answer: B,D
NEW QUESTION 60
Which three actions are required to configure two Cisco Nexus switches as vPC peers? (Choose three.)
- A. Create a peer link between switches.
- B. Configure different vPC domain IDs for each switch.
- C. Modify the network QoS policy.
- D. Enable the vPC feature.
- E. Configure matching vPC domain IDs.
Answer: A,C,E
NEW QUESTION 61
A customer asks you to configure QoS on a Cisco Nexus 7000 Series switch within a FlexPod solution.
Which three steps are required to accomplish this task? (Choose three.)
- A. Associate policies and actions with each traffic class.
- B. Perform a shut/no shut on the affected interfaces.
- C. Attach policies to logical or physical interfaces and VLANs.
- D. Define traffic classes.
- E. Attach policies to logical or physical interfaces and VSANs.
Answer: A,D,E
NEW QUESTION 62
You have a NetApp clustered Data ONTAP storage system and vSphere 6 cluster. You discover that VMware VAAI for NFS is not showing as enabled on one of the five ESXi hosts in your vSphere cluster.
In this scenario, what must you do to enable VAAI for NFS on that ESXi host?
- A. Set the DataMover. HardwareAcceleratedInit advanced setting to 0 on the ESXi host.
- B. Enable VMware vStorage for NFS on the NetApp SVM.
- C. Enable NFSv3 on the storage system.
- D. Install the NetApp NFS Plug-in for VMware VAAI on the ESXi host.
Answer: C
NEW QUESTION 63
You are asked to verify your MPIO settings for your ONTAP FlexPod solution. You are using VMware ESXi 6 and FCP as the storage protocol.
In this scenario, which MPIO setting would you use on the ESXi host?
- A. fixed path with array preference
- B. round robin
- C. fixed path
- D. most recently used
Answer: B
NEW QUESTION 64
Which two database types are supported with the VMWare vCenter 6.0 Server Appliance? (Choose two.)
- A. Microsoft SQL Server Express
- B. Oracle
- C. vPostgres (embedded)
- D. Microsoft SQL Server Enterprise
Answer: B,C
NEW QUESTION 65
Exhibit:
Which hardware component is shown in the exhibit?
- A. IOM
- B. GEM
- C. VIC
- D. Fl
Answer: A
NEW QUESTION 66
A customer uses Cisco Intersight and now wants to monitor their NetApp storage system with Intersight.
In this scenario, which three actions must be completed to accomplish this task? (Choose three.)
- A. Activate the API Gateway in ONTAP System Manager.
- B. Get an Intersight Advantage tier license.
- C. Deploy Active IQ Unified Manager.
- D. Get an Intersight Essentials tier license.
- E. Activate the API Gateway in Active IQ Unified Manager.
Answer: B,C,E
NEW QUESTION 67
A Cisco UCS chasis has two power suppliers connected to one PDU and two power supplies connected to another PDU. You would like to protect against the failure of one entire PDU.
In this scenario, which power policy should you configure in UCS Manager?
- A. grid
- B. redundant
- C. N+1
- D. N+2
Answer: A
NEW QUESTION 68
On a NetApp clustered Data ONTAP cluster, a volume named datastorel resides on an aggregate named node1 aggr1 and is mounted into the namespace at the junction path /esx cluster1/ds1.
A VMware virtual machine file named myhost.vmdk is at the root of the volume datastorel. A volume move operation relocates the datastorel volume to an aggregate named node3 aggr1.
In this scenario, what is the full path to the file myhost.vmdk after the volume move is complete?
- A. /esx_cluster1/ds1/myhost.vmdk
- B. /vo1/esx_cluster1/ds1/myhost.vmdk
- C. node3_aggr3/esx_cluster1/ds1/myhost.vmdk
- D. /esx_cluster1/datastore1/myhost.vmdk
Answer: A
NEW QUESTION 69
Which two LIFs are able to failover or migrate to other nodes in the cluster? (Choose two.)
- A. intercluster LIF
- B. cluster LIF
- C. data LIF of protocol iSCSI
- D. data LIF of protocol FCoE
- E. node management LIF
- F. data LIF of protocol NFS
- G. data LIF of protocol CIFS
Answer: B,G
NEW QUESTION 70
An administrator is trying to present an NFS datastore to an ESXi host.
Which two must be available before mounting? (Choose two.)
- A. export policy access
- B. junction path case sensitivity
- C. host name case sensitivity
- D. datastore name case sensitivity
Answer: A,C
NEW QUESTION 71
VMware ESXi 6 supports which three storage protocols? (Choose three.)
- A. CIFS
- B. SMB
- C. FCP
- D. iSCSI
- E. NFS
Answer: A,C,D
NEW QUESTION 72
An administrator has a FlexPod solution using VMware vSphere 6.0. The ESXi hosts use iSCSI for storage connectivity, and all paths have been configured and connected between the NetApp cluster and the ESXi hosts.
Virtual Storage Console has been installed and ESXi host-recommended settings have been applied to all hosts. The active LUN path for one of the iSCSI datastores experiences a connectivity failure and the LUN switches to a new active path.
In this scenario, which event would trigger the ESXi host to switch the active LUN path again?
- A. The host processes 1,000 I/O operations.
- B. The NetApp LIF is reverted to its home port.
- C. The ESXi host scans for new VMFS datastores.
- D. The original LUN path comes back online.
Answer: B
NEW QUESTION 73
When configuring a volume to contain a LUN, which administrative tool automatically applies NetApp recommendations?
- A. Data ONTAP command-line interface
- B. Microsoft SystemCenter
- C. VMware vSphere
- D. OnCommand System Manager
Answer: D
NEW QUESTION 74
......
Verified NS0-176 dumps Q&As - NS0-176 dumps with Correct Answers: https://www.passtestking.com/NetworkAppliance/NS0-176-practice-exam-dumps.html