[Dec-2025] FCSS_NST_SE-7.6 Free Sample Questions to Practice One Year Update
Download FCSS_NST_SE-7.6 exam with Fortinet FCSS_NST_SE-7.6 Real Exam Questions
NEW QUESTION # 37
Refer to the exhibit, which shows the output of diagnose sys session list.
If the HA ID for the primary device is 0, what happens if the primary fails and the secondary becomes the primary?
- A. Traffic for this session continues to be permitted on the new primary device after failover, without requiring the client to restart the session with the server.
- B. The session state is preserved but the kernel will need to re-evaluate the session because NAT was applied.
- C. The secondary device has this session synchronized; however, because application control is applied, the session is marked dirty and has to be re-evaluated after failover.
- D. The session will be removed from the session table of the secondary device because of the presence of allowed error packets, which will force the client to restart the session with the server.
Answer: A
NEW QUESTION # 38
Refer to the exhibits, which contain the partial configurations of two VPNs on FortiGate.
An administrator has configured two VPNs for two different user groups. Users who are in the Users-2 group are not able to connect to the VPN. After running a diagnostics command, the administrator discovers that FortiGate is not matching the user-2 VPN for members of the Users-2 group.
Which two changes must the administrator make to fix the issue? (Choose two.)
- A. Change to aggressive mode on both VPNs.
- B. Use different pre-shared keys on both VPNs.
- C. Enable XAuth on both VPNs.
- D. Set up specific peer IDs on both VPNs.
Answer: A,D
NEW QUESTION # 39
Refer to the exhibit.
An IPsec VPN tunnel is dropping, as shown by the debug output.
Analyzing the debug output, what could be causing the tunnel to go down?
- A. Dead Peer Detection is not receiving its acknowledge packet.
- B. The tunnel drops after the timer expires.
- C. The tunnel drops during rekey negotiation.
- D. Phase 2 drops but Phase 1 is up.
Answer: A
NEW QUESTION # 40
Which statement about parallel path processing is correct (PPP)?
- A. PPP does not apply to packets that are part of an already established session.
- B. PPP chooses from a group of parallel options lo identity the optimal path tor processing a packet.
- C. Software configuration has no impact on PPP.
- D. Only FortiGate hardware configurations affect the path that a packet takes.
Answer: B
NEW QUESTION # 41
What are two functions of automation stitches? (Choose two.)
- A. You can configure automation stitches on any FortiGate device in a Security Fabric environment.
- B. You can set an automation stitch configured to execute actions in parallel to insert a specific delay between actions.
- C. You can configure automation stitches to execute actions sequentially by taking parameters from previous actions as input for the current action.
- D. You can create automation stitches to run diagnostic commands and attach the results to an email message when CPU or memory usage exceeds specified thresholds.
Answer: C,D
NEW QUESTION # 42
Exhibit.
Refer to the exhibit, which contains partial output from an IKE real-time debug.
Which two statements about this debug output are correct? (Choose two.)
- A. Perfect Forward Secrecy (PFS) is enabled in the configuration.
- B. The initiator provided remote as its IPsec peer ID.
- C. The local gateway IP address is 10.0.0.1.
- D. It shows a phase 2 negotiation.
Answer: B,D
NEW QUESTION # 43
Refer to the exhibit, which shows the output of a policy route table entry.
Which type of policy route does the output show?
- A. An ISDB route
- B. A regular policy route
- C. A regular policy route, which is associated with an active static route in the FIB
- D. An SD-WAN rule
Answer: A
NEW QUESTION # 44
Refer to the exhibits.
An administrator is attempting to advertise the network configured on port3. However, FGT-A is not receiving the prefix.
Which two actions can the administrator take to fix this problem? (Choose two.)
- A. Use the set network-import-check disable command.
- B. Modify the prefix using the network command from 172.16.0.0/16 to 172.16.54.0/24.
- C. Restart BGP using a soft reset to force both peers to exchange their complete BGP routing tables.
- D. Manually add the BGP route on FGT-A.
Answer: A,B
NEW QUESTION # 45
During which phase of IKEv2 does the Diffie-Helman key exchange take place?
- A. IKE_Auth
- B. Create_CHILD_SA
- C. IKE_SA_INIT
- D. IKE_Req_INIT
Answer: C
NEW QUESTION # 46
In IKEv2, which exchange establishes the first CHILD_SA?
- A. IKE_Auth
- B. INFORMATIONAL
- C. CREATE_CHILD_SA
- D. IKE_SA_INIT
Answer: C
NEW QUESTION # 47
Refer to the exhibit, which shows the output of the command get router info bgp neighbors 100.64.2.254 advertised-routes.
What can you conclude from the output?
- A. The local router is advertising the 10.20.30.40/24 network to its BGP neighbor.
- B. The BGP neighbor is advertising the 10.20.30.40/24 network to the local router.
- C. The BGP state of the two BGP participants is OpenConfirm.
- D. The router ID of the neighbor is 100.64.2.254.
Answer: A
NEW QUESTION # 48
Refer to the exhibit, which shows a partial output from the get router info routing-table database command.
The administrator wants to configure a default static route for port3 and assign a distance of 50 and a priority of 0.
What will happen to the port1 and port2 default static routes after the port3 default static route is created?
- A. The port1 default static route will be injected into the FIB.
- B. The port2 default static route will be injected into the forwarding information base (FIB).
- C. Neither of the routes shown in the output will be injected into the FIB.
- D. Both default static routes shown in the output will be injected into the FIB.
Answer: B
NEW QUESTION # 49
Refer to the exhibit, which shows a partial output of the real-time LDAP debug.
What two actions can the administrator take to resolve this issue? (Choose two.)
- A. Ensure the account is active.
- B. Ensure the user logs in using 'John Smith' not 'jsmith'.
- C. Ensure the user is providing the correct user credentials.
- D. Ensure the user is a member of at least one AD group to ensure step 4 of the LDAP authentication process is successful.
Answer: A,C
NEW QUESTION # 50
Which statement about IKEv2 is true?
- A. Both IKEv1 and IKEv2 share the feature of asymmetric authentication.
- B. IKEv1 and IKEv2 share the concept of phase1 and phase2.
- C. IKEv1 and IKEv2 use same TCP port but run on different UDP ports.
- D. IKEv1 and IKEv2 have enough of the header format in common that both versions can run over the same UDP port.
Answer: D
NEW QUESTION # 51
Refer to the exhibit, which shows one way communication of the downstream FortiGate with the upstream FortiGate within a Security Fabric.
What three actions must you take to ensure successful communication? (Choose three.)
- A. Ensure the port for Neighbor Discovery has been changed.
- B. You must authorize the downstream FortiGate on the root FortiGate.
- C. You must enable Security Fabric/Fortitelemetry on the receiving interface of the upstream FortiGate.
- D. Ensure TCP port 8013 is not blocked along the way.
- E. FortiGate must not be in NAT mode.
Answer: B,C,D
NEW QUESTION # 52
Which two statements are true regarding heartbeat messages sent from an FSSO collector agent to FortiGate?
(Choose two.)
- A. The heartbeat messages can be seen on FortiGate using the real-lime FSSO debug.
- B. The heartbeat messages can be seen using the command diagnose debug authd fsso list.
- C. The heartbeat messages can be seen in the collector agent logs.
- D. The heartbeat messages must be manually enabled on FortiGate.
Answer: A,C
NEW QUESTION # 53
Refer to the exhibit, which shows the output of a debug command.
Which two statements about the output are true? (Choose two.)
- A. One of the neighbors has a router ID of 0.0.0.4.
- B. In the network connected to port4, two OSPF routers are down.
- C. The interlace is part of the OSPF backbone area.
- D. There are a total of five OSPF routers attached to the vorz4 network segment
Answer: B,C
NEW QUESTION # 54
Refer to the exhibit.
Assuming a default configuration, which three statements are true? (Choose three.)
- A. User B: Fail. There is no route to 95.56.234.24 using wan2 in the routing table.
- B. User C: Fail. There is no route to 10.0.4.63 using port1 in the touting table.
- C. Strict RPF is enabled by default.
- D. User A: Pass. The default static route through wan1 passes the RPF check regardless of the source IP address.
- E. User B: Pass. FortiGate will use asymmetric routing using wan1 to reply to traffic for 95.56.234.24.
Answer: A,B,E
NEW QUESTION # 55
Refer to the exhibit, which shows the output of get router info bgp summary.
Which two statements are true? (Choose two.)
- A. The local FortiGate is still calculating the prefixes received from BGP neighbor 100.64.2.264
- B. The local FortiGate has received 18 packets from a BGP neighbor.
- C. The TCP connection with BGP neighbor 100.64.2.254 was successful.
- D. The local ForliGate has received one prefix from BGP neighbor 100.64.1.254.
Answer: B,D
NEW QUESTION # 56
An administrator wants to capture encrypted phase 2 traffic between two FotiGate devices using the built-in sniffer.
If the administrator knows that there Is no NAT device located between both FortiGate devices, which command should the administrator run?
- A. diagnose sniffer packet any 'udp port 4500'
- B. diagnose sniffer packet any 'ah'
- C. diagnose sniffer packet any 'udp port 500'
- D. diagnose sniffer packet any 'lp proto 50'
Answer: D
NEW QUESTION # 57
Exhibit.
Refer to the exhibit, which shows the output of diagnose automation test.
What can you observe from the output? (Choose two.)
- A. The automation stitch test is not being logged.
- B. The test was unsuccessful.
- C. The automation stitch test failed but the HA failover was successful.
- D. An HA failover occurred.
Answer: A,B
NEW QUESTION # 58
Which exchange lakes care of DoS protection in IKEv2?
- A. IKE_Auth
- B. Create_CHILD_SA
- C. IKE_SA_NIT
- D. IKE_Req_INIT
Answer: D
NEW QUESTION # 59
......
Real exam questions are provided for Fortinet Certified Solution Specialist tests, which can make sure you 100% pass: https://www.passtestking.com/Fortinet/FCSS_NST_SE-7.6-practice-exam-dumps.html
FCSS_NST_SE-7.6 Exam with Guarantee Updated 68 Questions: https://drive.google.com/open?id=1W-yVKy65QdNNJDQJ04kk-TakzNKMrViX