[2021] Use Valid 5V0-41.20 Exam - Actual Exam Question & Answer
Test Engine to Practice 5V0-41.20 Test Questions
For more info, read the reference:
5V0-41.20 VMware vSAN 6.7 Specialist Exam 2019 VMware Learning Zone VCP Community VMware vSAN: Deploy and Manage [V6.7] VMware vSAN: Production Operations [V6.7]
Difficulty in Writing VMware 5V0-41.20: VMware vSAN 6.7 Specialist Exam
5V0-41.20: VMware vSAN 6.7 Specialist is a privileged achievement one could be graced with. Contrary to popular belief, certifying with VmWare is not as difficult as it appears if candidates have the necessary preparation tools to pass the 5V0-41.20: VMware vSAN 6.7 Specialist exam with experience. Certification questions consist of the foremost phenomenal and noteworthy queries, answers and description that consists of the complete course content. Certification questions have a brilliant 5V0-41.20 practice test with the most recent and important questions and answers in PDF files. PassTestking is confident in the accuracy and legitimacy of 5V0-41.20: VMware vSAN 6.7 Specialist exam dumps. Candidates can easily pass the 5V0-41.20: VMware vSAN 6.7 Specialist exam with genuine 5V0-41.20 dumps and get VmWare certification. These 5V0-41.20 practice exams are viewed as the best source to understand the 5V0-41.20: VMware vSAN 6.7 Specialist well by simply pursuing example questions and answers. If the candidate completes practice the exam with certification 5V0-41.20: VMware vSAN 6.7 Specialist dumps along with self-assessment to get the proper idea on VmWare accreditation and to pass the certification exam.
With the assistance of our expert team of VMware testing professionals, we have developed some quality 5V0-41.20 dumps PDF questions to help our customers plan for the VMware SD-WAN problem solving test 2021 5V0-41.20. Our 5V0-41.20 dumps pdf has a variety of IT student practice questions and replies that not only address the questions for the 5V0-41.20 examination, but also train the mind and depend on the true VMware SD-WAN Troubleshoot test. You just have to make sure you go through our VMware 5V0-41.20 dumps to label your progress at least once. Certificate Queries require delivering easy-to-use VMware SD-WAN troubleshoot 2021 5V0-41.20 practice test questions, which would definitely support the VMware 5V0-41.20 test planning. It is strongly recommended that you use our 5V0-41.20 examination questions to improve your grades. Our 5V0-41.20 practical examination questions are readily accessible for every computer and conveniently to train the consumer for his examination. Exam candidates should be acquainted with the principles of the application life cycle, Debug and validate an HTML5-based application, and have some hands-on experience with the related technology, either by specific training courses or through interacting with videos and demos available on MSDN and in VmWare Visual Studio. The 5V0-41.20 test will allow you to prepare so that you will have a silent similar test until the real test. VMware SD-WAN Troubleshooting 5V0-41.20 PDF questions can be used in a number of ways to give you the best insight into your exam scenario. It will also train you to plan your time for the actual VMware 5V0-41.20 test inside the given framework. But it also shows you time control, in other terms. To ensure the progress of the final exam, you need to go through our IT team’s given 5V0-41.20 test questions.
NEW QUESTION 14
Scenario 3:
After resolving numerous connectivity Issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
The network administrator has been made aware that Chicago is receiving traffic from non-SD-WAN sites, bottlenecking Chicago's interfaces. The network administrator's VMware SE has mentioned using the uplink feature to help resolve this.
What are two ways the uplink feature should be used in this scenario? (Choose two.)
- A. Set the uplink community to forward traffic to a group of neighbors.
- B. Direct all traffic to that neighbor designated as an uplink,
- C. Prevent the site in question from becoming a transit site.
- D. Stop mutual redistribution of routes from underlay and overlay.
Answer: B,C
NEW QUESTION 15
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
A network administrator has received an email from the applications development team requesting connectivity to their AWS VPC.
The administrator has configured the tunnel via the VMware SD-WAN Gateway. The tunnel status icon has not turned green.
Where are two places the administrator must check? (Choose two.)
- A. Determine if the PSK is mismatched between the AWS side and the VeloCloud Edge.
- B. Determine if the NVS has been enabled and assigned to a profile.
- C. Determine if the PSK is mismatched between the AWS side and the VeloCloud Gateway.
- D. Determine if the DH parameter on the Edge has been configured.
Answer: A,C
NEW QUESTION 16
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
A network engineer is configuring an Internet Backhaul Policy for the Chicago Branch to utilize NY's hub as a much better source for Internet for certain SaaS applications. For an unknown reason, the network engineer is not able to select the hubs in the Internet Backhaul Policy.
What could be the reason?
- A. The Edge's profile does not include Backhaul hubs as an option.
- B. The hub is not configured with the proper IP address.
- C. Dynamic Branch to Branch using gateways has not been enabled.
- D. The Dynamic Branch to Branch has not been enabled.
Answer: C
NEW QUESTION 17
Scenario 1:
The Dallas Branch location is having issues getting activated. The local network administrator is aware that the Edge device received a DHCP address and was able to connect to the internet. The Orchestrator is reporting the Edge as Down. No other changes were made post activation.
A network administrator is tasked with enabling SD-WAN at three branch locations. A topology has been provided for reference. For each site, the administrator is having issues bringing edges online, as another administrator has gone ahead and created a configuration ahead of time. The organization has several branch sites. One is am Internet-only site and two are Hybrid locations with both internet and MPLS. The last location is MPLS only. There are hub data center locations in this environment as well. Please refer to the topology.
Refer to the Exhibit(s).
What is the cause of this issue?
- A. The Edge will be offline for about 4 hours until it has completed the factory image installation.
- B. The activation link contained incorrect configurations for WAN overlays and WAN interfaces.
- C. The activation link did not contain any post-activation configuration to allow the Orchestrator to communicate with the Edge.
- D. The activation link did not specify the updated image location requiring the Edge to be re-activated.
Answer: D
NEW QUESTION 18
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
Users at a remote office are complaining about poor performance with certain applications. The network administrator has already configured Business Policies based on these requirements.
What is the sequence of parameters that the administrator can check to troubleshoot this problem? (Choose two.)
- A. Check underlay network (bandwidth, latency, jitter, packet loss).
- B. Change the bandwidth measurement under WAN Overlay Advanced Settings.
- C. Review Business Policies configuration and match them against the business requirements.
- D. Under Monitor, check Routing tab.
Answer: A,D
NEW QUESTION 19
Scenario 2:
After completing the branch activation activities for ail required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certconfigurations have been complete. The administrator also observed that several reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure thatall sites can talk to each other and all resources are accessible.
Exhibit.
A network administrator has been told that Dallas needs some high-availability in the event that the SD-WAINJ Edge goes offline for whatever reason. There is limited budget so the administrator must use the other available CE router as a fallback mechanism. The administrator will use VRRP to provide HA. When configuring VRRP, the SD-WAN Edge service restarted.
What caused this behavior?
- A. This is an expected behavior.
- B. The administrator failed to specify the Edge Type as a VeloCloud Cluster.
- C. The device is faulty and will need a replacement.
- D. The administrator failed to specify the Edge Type as a VeloCloud Active Standby Pair.
Answer: A
NEW QUESTION 20
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
A network administrator wants to achieve better high-availability and network reconvergence between LAN-side BGP Networks and the hub Edges in New York.
What must the administrator do?
- A. Modify the Keep Alive and Hold timers to the lowest possible values ensuring the Hold timer is 3 times more than the Keep Alive timer.
- B. Modify the Connect and Hold timers to the lowest possible values ensuring the Hold timer is 3 times more than the Connect timer.
- C. Nothing, the system will auto-rebalance connections and will provide sub-second convergence.
- D. Modify the Keep Alive and Hold timers to the lowest possible values ensuring the Keep Alive timer is 3 times more than the Hold timer.
Answer: C
NEW QUESTION 21
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot gel to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
A business policy is created and saved.
How can the network administrator verify the business policy is working?
- A. Executing Route table dump under VCE > Test St Troubleshoot > Remote Diagnostics and select Route Table dump and look for business policy applied in the Route table Dump stats.
- B. Select a VCE > Test & Troubleshoot > Remote diagnostics and select List Active flows and check the flows to see what Business policy is applied under the Business policy column.
- C. Check under the Monitor > Business Priority tab for Business policy statistics.
- D. Check under Monitor > Applications tab and check the listing of applications at the bottom of the screen and the category of the type of traffic there.
Answer: A
NEW QUESTION 22
Scenario 2:
After completing the branch activation for all required branches, the network administrator attempts to test connectivity between the various branches and between hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the some applications they are accessing.
Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
A technician has added Edges to an East Coast Profile. These Edges are not able to communicate via dynamic tunnels to Edges in the West_Coast profile. The technician has noticed that some Edges are able to establish dynamic tunnels.
What could be preventing Edges from being able to establish dynamic tunnels?
- A. Neither profile has been configured to utilize cloud gateways.
- B. The profiles are configured to only allow dynamic branch to branch for Edges within the same profile.
- C. The profiles are not configured to allow dynamic branch to branch VPNs.
- D. None of the existing profiles have Cloud VPN enabled thus preventing dynamic tunnels.
Answer: C
NEW QUESTION 23
Scenario 2:
After completing the branch activation activities for all required branches, the administrator attempts to test connectivity between the various branches and between the hubs and branches- The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
The tunnel from the Dallas site to the Seattle hub is not coming up.
What are two things that should be checked to determine the issue? (Choose two.)
- A. Dynamic Branch to Branch is not enabled.
- B. Hub WAN Interface might be behind a firewall.
- C. Spoke Edge and Hub Edge are two different Edge models.
- D. Spoke Edge and Hub Edge have a mismatched certificate.
Answer: C,D
NEW QUESTION 24
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
The SD-WAN Edge at this location has been activated. It is incapable of establishing any overlay tunnels. Due to this being an internet only branch, no underlay connectivity is present to the hubs. The SD-WAN Edge is connected behind a firewall and the security team states that all necessary ports are open.
How can this issue be resolved?
- A. The security team needs to open TCP port 4500 instead of TCP port 2426.
- B. The security team needs to open UDP port 2426 outbound and inbound.
- C. The security team need to open TCP port 2426 outbound but not inbound.
- D. The security team needs to open TCP port 22 instead of TCP port 2426.
Answer: A
NEW QUESTION 25
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
When checking connectivity from the San Jose branch, all users report that they can reach certain resources at the main data center. They are unable to reach locations elsewhere. The network administrator investigates and first looks at the Overlay Flow Control (OFC) Table.
What should the network administrator look for next to determine what the issue might be?
- A. Check the Global Segment Configuration to see if it has the Routing Flag enabled.
- B. Check with the local network administrator to see if the routes for the SD-WAN sites are present in San Jose's branch router.
- C. Determine if OSPF has been configured on the MPLS Routers at the hub.
- D. Check Test & Troubleshoot and review a route table dump of the NY hub site.
Answer: A
NEW QUESTION 26
Scenario 3:
After resolving numerous connectivity Issues throughout the various branch sites, connectivity between applications and users is finally present- The network administrator is informed (hat during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
Which metrics can a network administrator verify in the QoE screen to determine the overall health of Underlay and Overlay?
- A. Jitter Packet Loss, Speed.
- B. Packet Loss, Latency, Speed.
- C. Jitter, Speed, Latency.
- D. Jitter, Packet Loss, Latency.
Answer: C
NEW QUESTION 27
Scenario 1:
A network administrator is tasked with enabling SD-WAN at three branch locations. A topology has been provided for reference. For each site, the administrator is having issues bringing edges online, as another administrator has gone ahead and created a configuration ahead of time. The organization has several branch sites. One is an Internet-only site and two are Hybrid locations with both internet and MPLS. The last location is MPLS only. There are hub data center locations in this environment as well. Please refer to the topology.
Exhibit.
The network administrator determines the issue preventing the Dallas Branch from coming online.
Refer to the Exhibit(s).
What must the administrator do for the Edge to communicate with the Orchestrator and other branches?
- A. Create a User-defined WAN Overlay to bond both interfaces
- B. Reverse the WAN Overlay configurations
- C. Delete the User Defined WAN Overlays as the Orchestrator will discover these automatically on MPLS and Internet
- D. Update the Orchestrator to the latest version as it enables "Auto WAN Swapping"
Answer: C
NEW QUESTION 28
......
5V0-41.20 Actual Questions Answers PDF 100% Cover Real Exam Questions: https://www.passtestking.com/VMware/5V0-41.20-practice-exam-dumps.html