HPE7-A07 by HP Actual Free Exam Q&As

Question 1

A customer's infrastructure is set up to use both primary and secondary gateway clusters on the SSID profile cased on best practices. Why do they have an equal split of their 120 APs across the primary and secondary gateway clusters?

A. The primary and secondary gateway clusters are up. but the cluster preemption Is not enabled B. The secondary gateway cluster is a homogeneous cluster with six nodes. C. The primary gateway cluster is a heterogeneous cluster with six nodes. D. The primary and secondary gateway clusters are up. and the cluster preemption is enabled

Discussion 0

Correct Answer: A Vote an answer

Explanation: Only visible for PassTestking members. You can sign-up / login (it's free).

Question 2

An administrator is creating a fabric with NetConductor in HPE Aruba Networking Central Considering an EVPN VXLAN fabric, click on the most appropriate layer to be configured as a Rome-Reflector Persona.

Discussion 0

Correct Answer:

Explanation:
In the context of an EVPN VXLAN fabric, the Route-Reflector Persona is most appropriately configured at the Services Aggregation layer. This layer is responsible for interconnecting different network services and typically includes more robust, higher-capacity devices capable of handling the route-reflection functions for EVPN VXLAN.
In an Aruba Networks fabric, route reflectors are used to optimize the distribution of BGP routes. The Services Aggregation layer, which is centrally located in the network topology, is best suited for this role due to its high availability and ability to efficiently manage routes between the core and access layers.
Therefore, if you were to click on the image provided, you would select the Services Aggregation layer to configure the Route-Reflector Persona.

Question 3

Which statement about the AOS-CX VOQ feature is true?

A. It dynamically allocates extra buffer space to egress queues to reduce the potential of dropped packets B. It enhances local prioritization of datagrams marked with priority code points C. It optimizes LACP uplinks that connect to multi-chassis VSX LAGs D. It provides ingress buffers with queues for each egress port to reduce risk of dropped packets

Discussion 0

Correct Answer: D Vote an answer

Explanation: Only visible for PassTestking members. You can sign-up / login (it's free).

Question 4

You are troubleshooting a WLAN deployment with APs and gateways set up with an 802.1X tunneled SSIO.
End-users are complaining that they can't connect to die enterprise SSID. Which possible AP tunnel states could be the cause of the Issue? (Select two.)

A. SM_STATE_SURVIVING B. SM_STATE_RE KEYING C. SM_STATE_SURVIVED D. SM_STATE_CONNECTED E. SM_STATE_CONNECTING

Discussion 0

Correct Answer: B,E Vote an answer

Explanation: Only visible for PassTestking members. You can sign-up / login (it's free).

Question 5

A university runs its own TV station in the city. The IT department deploys a multimedia server so the TV productions can be sent out to the entire campus over the IP network using multicast-based communications.
In order to improve the bandwidth consumption, PIM Sparse Mode and IGMP Snooping features are enabled.
When wireless users join the multicast groups, all users connected to the same WLAN experience poor network performance. However, wired users are not affected in this way. While troubleshooting, the network administrator saves the packet captures shown in the exhibit and concludes that all users, even those not joining the multicast group, receive the same multicast flow at slow speeds.
Which features should the network administrator enable to fix the problem?

A. UCC QoS correction and Multicast Transmission Optimization B. ARP broadcast conversion into unicast and Multicast Transmission Optimization C. Dynamic Multicast Optimization and Multicast Transmission Optimization D. Dynamic Multicast Optimization and UCC QoS correction

Discussion 0

Correct Answer: C Vote an answer

Explanation: Only visible for PassTestking members. You can sign-up / login (it's free).

Question 6

A network administrator attempts to improve multicast traffic flow and performs some packet captures for validation. What can the network administrator conclude from the results?

A. The type field remains consistent because Dynamic Multicast Optimization (DMO) was configured. B. The data rate increased from 6 Mbps to 300 Mbps because Dynamic Multicast Optimization (DMO) was configured. C. The data rate increased from 6 Mbps to 300 Mbps because Broadcast Multicast Optimization (BCMCO) was configured. D. The capture taken after optimization does not show a packet length because Multicast Transmission Optimization was configured.

Discussion 0

Correct Answer: B Vote an answer

Explanation: Only visible for PassTestking members. You can sign-up / login (it's free).

Question 7

A manufacturing company depends on FTP, email, and RDP services, which are accessed locally. On Monday morning, RDP sessions are not responsive when users on the employee WLAN download their email and large files from the FTP server simultaneously. The network administrator concludes that the mobility gateway's uplinks are congested when that happens.
Which would be the best option the network engineer can propose in the implementation plan to improve RDP responsiveness?

A. Update the employee user role with an ACL on position 3 that puts RDP traffic to a high-priority queue and all other traffic to a low-priority queue B. Update the spanning-tree configuration from enabled to disabled on the gateway's link aggregation to increase the available bandwidth and avoid congestion C. Set the WMM voice DSCP value on the employee WLAN to 56 and enable the RDP application layer gateway D. Change the employee WLAN from tunneled to bridged so that the bottleneck in the mobility gateways is removed

Discussion 0

Correct Answer: A Vote an answer

Explanation: Only visible for PassTestking members. You can sign-up / login (it's free).

Question 8

You configured" a bridged mode SSID with WPA3-Enterprise and EAP-TLS security. When you connect an Active Directory joined client that has valid client certificates. ClearPass shows the following error.

What is needed to resolve this issue?

A. Recreate the SSID m tunneled mode. B. Modify your ACX-AD authentication source to include the UPN in the search. C. Enable authorization in your Authentication Method. D. Configure ClearPass to trust the client certificate.

Discussion 0

Correct Answer: B Vote an answer

Explanation: Only visible for PassTestking members. You can sign-up / login (it's free).

HP Aruba Certified Campus Access Mobility Expert Written - HPE7-A07 Exam Practice Test