HP Fast Track - Applying HP FlexNetwork Fundamentals - HP2-Z30 Exam Practice Test
A network administrator acquires a new HP Comware switch from HP with the factory default settings. The network administrator logs into the console port and configures the following information:
user-interface aux0 quit super password level 0 simple hp0 super password level 1 simple hpl super password level 2 simple hp2 super password level 3 simple hp3
What happens the next time the network administrator logs into the console?
user-interface aux0 quit super password level 0 simple hp0 super password level 1 simple hpl super password level 2 simple hp2 super password level 3 simple hp3
What happens the next time the network administrator logs into the console?
Correct Answer: A
Vote an answer
What are the default logging properties for an HP Comware switch? (Select two)
Correct Answer: C,D
Vote an answer
Refer to the network exhibit.
All of the switches in the exhibit are configured as follows:
Config name = "Region!'
Revision #= 1
Instance 1=VLANs 10.12
lnstance2 = VLANs11,13
1ST instance = VLANs 1-9.14-4094
Currently, onlyVLANs 1,10,11,12, and 13 exist on the four switches. A network administrator adds VLAN 15 to Switch_C. How is the topology affected by this change?
All of the switches in the exhibit are configured as follows:
Config name = "Region!'
Revision #= 1
Instance 1=VLANs 10.12
lnstance2 = VLANs11,13
1ST instance = VLANs 1-9.14-4094
Currently, onlyVLANs 1,10,11,12, and 13 exist on the four switches. A network administrator adds VLAN 15 to Switch_C. How is the topology affected by this change?
Correct Answer: C
Vote an answer
Which Intelligent Management center (IMC) module implements policies for environments that support bringsyour own device (BYOD)?
Correct Answer: A
Vote an answer
What is a key emerging standard protocol that HP Virtual Application Networks (VAN) use to implement Software-Defined Networks (SDN)?
Correct Answer: A
Vote an answer
Which IMC agent starts and stops the IMC server and allows a network administrator to view the status of the IMC processes?
Correct Answer: D
Vote an answer
A network administrator receives a new HP Provision switch and notices that the software version running on the switch is older than what is currently used in the network. The network administrator copies an updated version of the operating system from the new switch's USB port to the secondary flash location. The network administrator then executes the following command:
Provision# boot system flash secondary:
The switch reboots using the new operating system. However, when the network administrator turns off the switch and turns it back on, the switch boots from the old operating system.
Which solution should the network administrator use to fix the problem?
Provision# boot system flash secondary:
The switch reboots using the new operating system. However, when the network administrator turns off the switch and turns it back on, the switch boots from the old operating system.
Which solution should the network administrator use to fix the problem?
Correct Answer: A
Vote an answer
Explanation: Only visible for PassTestking members. You can sign-up / login (it's free).