6006-1 by Avaya Actual Free Exam Q&As

Question 1

Which command verifies the firmware of the G430/450 Media Gateway?

A. Show image version B. Image C. Dir D. list configuration firmware

Discussion 0

Correct Answer: A Vote an answer

Question 2

When configuring the LSP/SLS on Media Gateways, the gatekeeper information needs to be administered so that stations register to the gateway during a WAN outage.
How would this be accomplished?

A. In Cm administer the 'system-parameter mg-recovery-rule [#]' and identify the station. B. In CM use the 'change station' command and input the node of the gateway for the field for 'Survivable GK Node Name' C. In CM use the 'change station' command set 'Survivable COR' to Y. D. In CM use the 'change station' command and set the field 'Survivable Trunk Dest'? to Y

Discussion 0

Correct Answer: A Vote an answer

Question 3

Firmware download procedure for programmable circuit packs (eg CLAN, IPSI, MedPro) include the Self-download and the CLAN distributed download.
Which statement describes the command that is used to schedule the CLAN distributed firmware download procedure?

A. In the SAT type 'change firmware download' B. In the SAT type 'enable filexfer' C. Access the maintenance web interface, under 'IPSI Firmware Updates'. Click download IPSI firmware. D. In the SAT type 'status firmware download'.

Discussion 0

Correct Answer: A Vote an answer

Question 4

A technician has a communication Manager running on S87xx server, G850 Gateway. Most of the phones are H.323 IP 46xx and 96xx series. Upon testing, it is discovered that all the IP phones have no dial tone. All of the hardware has been verified to be working properly.
Which two steps should be taken to identify the cause of problem? (Choose two)

A. Verify that the MedPro Board has the correct IP settings B. Set a static IP address on the laptop and see if the TN799 board can be pinged. C. Set a static IP address on the laptop and see if the TN3202 or TN2602 boards can be pinged. D. Set a static IP address on the laptop and see if the TN3212 Board can be pinged.

Discussion 0

Correct Answer: A,B Vote an answer

Explanation: Only visible for PassTestking members. You can sign-up / login (it's free).

Question 5

A media gateway G430 has been configured with an Avaya server S8300 acting as internal call Controller. Gateway and server are assigned to VLAN 12.
Which gateway command must be used to add the internal Call Controller to VLAN 12?

A. Icc-vlan 12 B. Set vlan server 12, then "icc-vlan" C. "interface vlan 12", then "icc-vlan" D. Set default-vlan 12

Discussion 0

Correct Answer: C Vote an answer

Question 6

What are two ways of obtaining the RFA Module ID (MID) and System ID (SID)?
(Choose two.)

A. From the CM SAT issue the command 'display system-parameters customer-options. B. From the CM SAT issue the command list configuration software-versions. C. From the CM Linux prompt issue the command 'systat'. D. From the CM Linux prompt issue the command "statuslicense -V.

Discussion 0

Correct Answer: A,D Vote an answer

Question 7

How many IP address need to be configured for a G450 Media Gateway's Layer 3 switch, Media gateway Processor (MGP), and internal VoIP module?

A. 3 B. 4 C. 2 D. 1

Discussion 0

Correct Answer: C Vote an answer

Avaya Aura(TM) Communication Manager (R5.2.1) Implementation - 6006-1 Exam Practice Test