Cisco Designing Cisco Wireless Networks - 300-110 Exam Practice Test

A customer designs a Cisco wireless environment to provide connectivity to employees and guests. The guest SSID must be configured on three anchor WLCs named Anchor1, Anchor2, and Anchor3 in a DMZ. The guest anchor priority must be configured to ensure that Anchor1 has the highest priority. Which priority level must be incorporated in the design for Anchor1?

A wireless engineer must design a backhaul link. The engineer has a mesh access point that has a wired connection back to the infrastructure. What must be changed in the AP role before a change is made in the AP mode?

A network design supports data and voice in 2.4 GHz and 5.0 GHz. The design must support asset tracking without affecting the existing design. Which action must be taken?

An engineer must perform a predictive design for a wireless network. The customer has devices that can tolerate at most 100 ms of delay when roaming. Which design criteria must be used?

A customer wants to provide wireless coverage in a parking lot outside of a building. An engineer determines that three APs are required. The APs can be mounted on the light poles in the parking lot because there are cable routes already in place for these locations. The closest wiring closet is approximately 200 meters away.
Which setup powers and connects the APs back to the customer network?

A network engineer must design a new wireless solution for a company, but the budget can only stretch to include a single Cisco 9800-40 WLC. The company requires high availability between the WLC and the core switch in the event of a cable failure. The WLC must dynamically manage port redundancy and perform load balancing between APs transparently. Which design approach must the engineer take to meet the requirements?

What happens to an AP when a flex profile name is changed in a site tag?

Which CLI command does an engineer use to validate that the redundancy peer of a Stateful Switchover pair of controllers is up and connected?

A consulting engineer is preparing to survey a brownfield deployment for a 6000-sqft building with four floors that have APs. The entire building is being remodeled and the furniture, office walls, and decoration are being updated. The engineer must perform a survey analysis on the potential RF impact of newer furniture materials. How must the survey be conducted?

How are mobility groups created, excluding mobility anchors?