199-01 by Riverbed Actual Free Exam Q&As

Question 1

Place the following commands to upgrade a Steelhead appliance from the CLI in the correct order. (NotE. include only the necessary steps) 1) SH (config) image install image.img 2 2) SH (config) image fetch http://server/path/image.img 3) SH (config) boot system 2 4) SH (config) restart clean 5) SH (config) reload 6) SH (config) write memory

A. 2, 3, 5, 1, 6 B. 2, 1, 3, 6, 5 C. 1, 2, 5, 4 D. 1, 2, 3, 4, 5, 6 E. 1, 2, 3, 6, 5

Discussion 0

Correct Answer: B Vote an answer

Question 2

In the exhibit,

there is a resident firewall inside the WAN cloud that drops packets with any TCP option.The customer allows you to use fixed-target rules instead.The firewall policy can only allow unassigned ports 7750-7751 to pass-through it.Additionally, the SH3 has been configured with service port 7750, while SH4 has been configured with service port 7751.Which of the following fixed-target rule specification is correct?

A. The fixed-target rule at SH4 peers to the inpath0_0 IP address of SH3 as the target appliance with port number 7750.The fixed-target rule at SH3 peers to the inpath0_0 IP address of SH4 as the target appliance with port number 7751. B. The fixed-target rule at SH4 peers to the inpath0_0 IP address of SH3 as the target appliance with port number 7810.The fixed-target rule at SH3 peers to the inpath0_0 IP address of SH4 as the target appliance with port number 7810. C. The fixed-target rule at SH4 peers to the inpath0_0 IP address of SH3 as the target appliance with port number 7750.The fixed-target rule at SH3 peers to the inpath0_0 IP address of SH4 as the target appliance with port number 7750. D. The fixed-target rule at SH4 peers to the inpath0_0 IP address of SH3 as the target appliance with port number 7800.The fixed-target rule at SH3 peers to the inpath0_0 IP address of SH4 as the target appliance with port number 7800. E. The fixed-target rule at SH4 peers to the inpath0_0 IP address of SH3 as the target appliance with port number 7751.The fixed-target rule at SH3 peers to the inpath0_0 IP address of SH4 as the target appliance with port number 7750.

Discussion 0

Correct Answer: A Vote an answer

Question 3

One of the Steelhead appliances in your Steelhead appliance cluster is running an older version of RiOS.You decide to schedule a change window to upgrade that Steelhead appliance's imageto the current release.What should you do to ensure that the Steelhead appliance optimization still occurs and the upgraded Steelhead appliance no longer accepts new connections?

A. Create an in-path rule on the Steelhead appliance to bypass the connections B. On the Interceptor appliance, click on "Pause" for that particular Steelhead appliance C. All of the above D. Schedule a job on the Steelhead appliance to remove itself from the cluster E. Enable the "no in-path accept new" CLI command

Discussion 0

Correct Answer: B Vote an answer

Question 4

If a file is not optimized for more than one user at a time, this indicates:

A. Steelhead appliance is configured with the incorrect speed or duplex on of the in-path interfaces B. Steelhead appliance is not able to acquire a "File Hold Key (FHK)" C. Steelhead appliance is not able to acquire a "Double Link (doulink)" D. Steelhead appliance has entered admission control E. Steelhead appliance is configured with the incorrect speed or duplex on the Primary interface F. Steelhead appliance is not able to acquire an "Opportunistic Lock (oplock)"

Discussion 0

Correct Answer: F Vote an answer

Question 5

You are using Steelhead appliances in an Oracle Forms environment and are not seeing adequate acceleration.What could be the cause of this?

A. Oracle Forms optimization only works with Oracle Applications 8i B. Oracle Forms optimization is enabled by default. However, you must set an in-path rule to enable this feature. C. You need to install a separate Oracle Forms license D. Oracle Forms optimization can only be configured from the command line (CLI) E. Oracle Forms optimization only works with Oracle Applications 9i

Discussion 0

Correct Answer: B Vote an answer

Question 6

What is the CLI command for starting the Configuration Wizard?

A. # configuration wizard start B. restart clean C. (config) # configuration jump-start D. (config) # wizard start E. # configuration start

Discussion 0

Correct Answer: C Vote an answer

Question 7

What is the primary purpose of enabling Multiple Interface Support on the Interceptor appliance?

A. It allows the Interceptor appliance to be managed by in-path interfaces as well as the primary interface. B. It allows the Interceptor appliance to communicate using multicast to in-path interfaces on the Steelhead appliances. C. It allows for the ability to support multiple NICs on the Interceptor appliance. D. It allows the Interceptor appliance to communicate with Steelhead appliances and other Interceptor appliances using more than one in-path interface.

Discussion 0

Correct Answer: D Vote an answer

Question 8

To configure a Steelhead appliance for logical in-path mode, the following must be enabled in the General Service Settings page:

A. A, B, and C B. B and C C. Enable Optimizations on Interface inpath0_0 D. Enable L4/PBR/WCCP Support on Interface wan0_0 E. Reset Existing Client Connections on Start Up

Discussion 0

Correct Answer: B Vote an answer

Question 9

In configuring failover settings, which of the following interfaces is used for communicating with the backup Steelhead appliance?

A. None of the above B. inpath0_0 C. Primary D. AUX E. inpath0_1

Discussion 0

Correct Answer: B Vote an answer

Question 10

Which of the following methods can be used to reduce the load on a router configured to use outbound interface WCCP redirection? (Select 3)

A. Use Redirect lists to control what traffic gets redirected B. Use the router command "load interval 30" to restrict WCCP to use 30% of the CPU C. Using inbound interface redirection instead D. Use fixed-target rules and remove WCCP on the WAN facing interfaces E. Use Event Element Manager (EEM) to load balance between a clustered Steelhead appliance deployment

Discussion 0

Correct Answer: A,C,D Vote an answer

Riverbed Certified Solutions Professional - 199-01 Exam Practice Test