Professional service

The content system of 100-490 exam simulation: Supporting Cisco Routing and Switching Network Devices is constructed by experts. After-sales service of our study materials is also provided by professionals. If you encounter some problems when using our products, you can also get them at any time. After you choose 100-490 preparation questions, professional services will enable you to use it in the way that suits you best, truly making the best use of it, and bringing you the best learning results. Our study materials have a professional attitude at the very beginning of its creation. The series of 100-490 measures we have taken is also to allow you to have the most professional products and the most professional services. I believe that in addition to our study materials, you have also used a variety of products. What kind of services on the 100-490 training engine can be considered professional, you will have your own judgment. But I would like to say that our products study materials must be the most professional of the 100-490 exam simulation: Supporting Cisco Routing and Switching Network Devices you have used.

Diverse version selection

Everyone has different learning habits, 100-490 exam simulation: Supporting Cisco Routing and Switching Network Devices provide you with different system versions. Based on your specific situation, you can choose the version that is most suitable for you, or use multiple versions at the same time. After all, each version of 100-490 preparation questions have its own advantages. If you are very busy, you can only use some of the very fragmented time to use our study materials. For example, on the bus, you can choose the APP version of 100-490 training engine. After being used for the first time in a network environment, you can use it in any environment. The APP version of study materials can save you traffic. The PDF version of our 100-490 exam simulation: Supporting Cisco Routing and Switching Network Devices can be printed out, suitable for you who like to take notes, your unique notes may make you more profound. Of course, the PC version of our study materials is also a good choice if conditions allow.

After learning about several advantages of 100-490 preparation questions, I believe you have more understanding of the real questions and answers. You can download the trial version for free. After using the trial version of our study materials, I believe you will have a deeper understanding of the advantages of our 100-490 training engine. The development of society urges us to advance and use our study materials to make us progress faster and become the leader of this era. The best you need is the best exam preparation materials. 100-490 exam simulation: Supporting Cisco Routing and Switching Network Devices will accompany you to a better future.

Constantly updated system

As you know, today's society is changing very fast. We also need new knowledge to fill in as we learn. 100-490 exam simulation: Supporting Cisco Routing and Switching Network Devices is selected many experts and constantly supplements and adjust our questions and answers. When you use our study materials, you can find the information you need at any time. When we update the 100-490 preparation questions, we will take into account changes in society, and we will also draw user feedback. If you have any thoughts and opinions in using our study materials, you can tell us. We hope to grow with you and the continuous improvement of 100-490 training engine is to give you the best quality experience.

In today's rapid economic development, society has also put forward higher and higher requirements for us. In addition to the necessary theoretical knowledge, we need more skills. Our 100-490 exam simulation: Supporting Cisco Routing and Switching Network Devices is a great tool to improve our competitiveness. After we use our study materials, we can get the Cisco certification faster. This certification gives us more opportunities. Compared with your colleagues around you, with the help of our 100-490 preparation questions, you will also be able to have more efficient work performance. Our study materials can bring you so many benefits because they have the following features. I hope you can use a cup of coffee to learn about our 100-490 training engine. Perhaps this is the beginning of your change.

DOWNLOAD DEMO

About 100-490 Exam

This exam will test your ability according to the skills needed for onsite support of Cisco routers, operating environments, and switches. Particularly, the CCT Routing and Switching certification is for those who plan to or are currently supporting Cisco devices, usually with the help of some upper-engineering support that can be received from the third-party maintainer field engineers. You should also go for this certification exam if you have technical experience and want to move into the field of networking. There are no specific prerequisites to take the official test, but you do need to learn the topics that will be covered in the final test.

Exam Topics

The content of the Cisco 100-490 test revolves around four thematic areas. These topics have different weights in the exam syllabus that are shown below as percentages. While getting ready for the test, you need to devote more time to the domains with higher weight. However, only mastering the whole exam content guarantees success in this certification test. Now let’s take a closer look at the domains covered in the Cisco 100-490 exam.

• Service-Related Competence – 26%

  This section comes with the students’ skills, such as locating and utilizing a text editor (Notepad 4.2); locating and utilizing the Windows command prompt; locating, configuring, and utilizing Terminal Emulation (including Tera, Putty, and Term); configuring Ethernet port networks settings on the laptop (including default gateway, subnet mask, and IP address) as well as establishing a link with Ethernet ports with the help of Cisco equipment and relevant cable; establishing a physical link between laptop and Cisco console port; connecting, configuring, and verifying device interface operation status. Moreover, the part requires that the learners have proficiency in configuring and utilizing FTP T as well as FTP servers (including Filezilla, TFTP d32/64,); executing software upgrade/downgrade with the help of FTP, TFTP, USB Storage, tftpdnld, or xmodem; handling customizations via the IP/TCP network; executing Cisco device password recovery; defining as well as correcting frequently encountered network problems at Layers 1 & 2 (including serial/ether interface status; Ethernet layer 2 – full & half duplex, speed issues; WAN serial loopback test – 56K, T1, Telco assisted loopback).

• Fundamental Networking Knowledge – 25%

  Within this topic, the applicants need to have the expertise in utilizing the TCP/IP & OSI models as well as the associated protocols in order to understand how data flows within a network. Besides that, they should possess the relevant skills in explaining the basic functionality and core differences of hardware, such as wireless access points, router, LAN switch, router. Additionally, the candidates must be proficient in distinguishing various Layer 2 technologies (including Ethernet, Fast Ethernet, Gigabit Ethernet, Serial, and Optical); describing LAN cabling; describing the DSU/CSU function; describing the Telco termination point; describing an IPv6 & IPv4 address as well as subnet; describing the PING, FTP, and TFTP functions; describing the SSH & Telnet functions.

• Cisco Equipment & Associated Hardware – 20%

  This domain includes the individuals’ skills such as identifying the Cisco equipment. This involves the familiarity with Cisco Nexus 3000 Series, Nexus 9000 Series, Nexus 7000 Series, MDS 9000 Series, Catalyst 6500 E-Series, Catalyst 6800 Series, Catalyst 9000 Series, Catalyst 1000, 2960, 3650, 3850 Series & Meraki switches as well as Cisco ASR 1000 Series, Cisco ASR 9000 Series, Cisco 8000 Series, NCS 5500 Series, NCS 5000 Series routers, Cisco 800, 900, 1100, 4000 Series Integrated Service routers. Additionally, the examinees need to demonstrate their expertise in defining Cisco products by model number as well as logo marking (including line card, locations on chassis, adapter, or module); determining Cisco Transceiver Modules; defining and placing the Cisco product serial number (including module, line card, adapter, or locations on chassis). They should also have the ability to define and explain often encountered elements; understand hardware memory general terms & their utilization in Cisco switches & routers; define the cabling on the Cisco equipment; determine tools to install and replace hardware; define various loop-back plugs (including T1, RJ45 Ethernet, 56K).

• Cisco IOS Software Operation – 29%

  To tackle the questions from this subject area, the test takers must be capable of describing the key functions of Cisco IOS, IOS-XE, IOS-XR, as well as NX-OS software; navigating between different operating modes; defining the device current mode; copying and pasting a configuration file from/to a switch or router; utilizing as well as interpreting the fundamental Cisco IOS Software commands; explaining the location and the procedure to change the configuration register parameter; defining a configuration file on a Cisco device; explaining the licensing procedure on different platforms; explaining Install Mode IOS-XE/ Bundle Mode.

Reference: https://www.cisco.com/c/en/us/training-events/training-certifications/exams/current-list/100-490-rstech.html

More about 100-490 Exam

The potential of the technicians working on the tasks connected to 100-490 exam assists in picking out models for Cisco switches and routers, accessories, interfaces, and cabling. Their knowledge as well is in the matters of software operation modes for Cisco IOS and the identification of commonly reachable software. Other skills that these technicians should portray are about Cisco CLI for connecting and servicing products.

For more information visit:

Cisco 100-490 Exam Reference

Cisco 100-490 Exam Syllabus Topics: